someone please send me the broadview for Da0zqfmb6f0 rev f.
Can someone please send me the broadview for Da0zqfmb6f0 rev f.
-
Hi guys, I'm working on a MSI Ventus RTX 4080 16G. The GPU has 12v, 5v, however what I assume is the 1.8v rail has 1.1v and what I assume to be PEX is 0v. As you may have guessed already there is no Vmem and no Vcore.
I have looked around in related forum posts for a schematic so Much appreciated if anyone can share a Broadview schematic.
Thanks. -
Hi,
Anyone has Dell precision 7530 DAP10 LA-F591p schematic and Broadview.... -
Hello, the laptop It turns on and off several times, it takes a long time to send video, possibly it is bios?
Here are the bios and the schematics.
Could someone help me verify that the bios is correct? thank you so much !!... -
Hello Everyone,
Someone can help me with Alienware x15 R2 LA-L611P rev 1.0 - Schematic and Broadview.
Thanks in Advance. -
Hello everyone,
I'm turning to the Badcaps community to help me troubleshoot the radio Rx card from my (old) garage door opener. While I could just ditch that card and replace the whole system, I first would like to understand "why" it suddenly stopped working, because that's just how I am wired...!
Some basics: the receiver works on a 30.875 Mhz frequency. Yes, I'm aware this is not in use anymore in a looot of places. It does not use any rolling code, it's just a regular dip-switch code that you have to set up on both the receiver and transmitter. The receiver...
Comment