New Members
Please consider donating to this site if it has helped you. We rely on these donations.
Please also introduce yourself here Introduce yourself here.
And finally, Read the Forum rules here.
Alienware x15 R2 LA-L611P rev 1.0 - Schematic and Broadview
Hi guys, I'm working on a MSI Ventus RTX 4080 16G. The GPU has 12v, 5v, however what I assume is the 1.8v rail has 1.1v and what I assume to be PEX is 0v. As you may have guessed already there is no Vmem and no Vcore.
I have looked around in related forum posts for a schematic so Much appreciated if anyone can share a Broadview schematic.
Good morning, colleagues.
I'm looking for the schematic or boardview for a Dell Alienware M16 R1 AMD (Infinity A+N MB1 213199-1 Y5J11$CA).
I would really appreciate it if someone could share it.
My main issue is that the backlight is not working. I found fuse F5503 to be blown; I replaced it, but it blows again (goes into protection).
It's worth noting that there's no short on the fuse line, so any guidance or similar experience would be greatly appreciated.
Hey guys I have a buddy that spilled liquid on his Alienware and now when powered on it says it cannot detect the hard drive. I'm sure the circut is shorted I'd like to replace all the components in that circut and get the board all cleaned up.
Its a Alienware m15 R5 Ryzen, P109f002, with motherboard GDL56 LA-K453P Rev:1.0
I really need the board view.. i think i have the correct scematics but if you could also post those so im 100% sure i have the correct ones that would be great!
Comment