Hello need Compal QALA0 LA-7762P Dell Latitude E6530. I ask if it is similar to the scheme Compal QALA0 LA-7761P
Request Compal QALA0 LA-7762P
Collapse
X
Related Topics
Collapse
-
by duderCould someone please have a look at this bios? I have brought Dell back to life with another BIOS but would like to keep ME Region. I am still learning to use ME Analyzer. Thanks in advance.
That is actually a Dell E6530. I made a typo with the filename....-
Channel: BIOS Requests ONLY!
-
-
by Loki_FidoHi ya folks,
Hope everyone's having a good day.
I have a HP ENVY x360 2 in 1 Laptop 13-bf0002TU with nothing on the screen.
The laptop starts but no display. Connecting to an external monitor give me nothing too. Ive attached my original backup bios
Make HP ENVY x360 2 in 1
Model 13-bf0002TU
S/N CND3171C5T
Prod ID 6L2F0PA#ABJ
I looked up at this site before writing this request. And there was a link. But i couldn't download any files from it.
Any moderator could look it up, if possible? It says, "Invalid file...-
Channel: BIOS Requests ONLY!
-
-
by mindoverflowhello,
there is an asus gtx1650 which displays fine in windows but if i run a benchmark test it displays artifacts and the driver crashes after a second or two.
I changed pads and thermal paste.
I run mats test but it is reporting 0 errors.
I then tried to run the mods version 400.271_1650 test, it first ran and stopped with a 'breakpoints limit reached after 5 retries' error and the fans went full speed.
After a reboot, I tried to run the test again, but now the test fails and says "ERROR: Couldn't clear GPU's interrupt...02-09-2022, 03:22 PM -
by usuaiawould highly appreciate if someone can share above schematic and boardview?!
thanks in advance-
Channel: Schematic Requests ONLY!
-
-
by ebyte64Good day.
I would like to request a bios for the following laptop?
Model: Acer P214-52-58CH
Model No: N19Q7
S/N: NXVLHE0H11204BA27600
SNID: 11201936276
Symptoms: Laptop powers on but no picture on screen.
I have already checked voltages and all is present. I have checked resistance on the coils to see if the chipset or cpu might be shorted. All resistances look normal. I have tried diffrent ram and I have reset the bios. I have also visually inspected the board to see if anything is burnt or if there are any traces of liquid...-
Channel: BIOS Requests ONLY!
09-25-2024, 05:59 AM -
- Loading...
- No more items.
Comment