Dell XPS 9360 - LA-D841P Rev:3.0 schematic/boardview

[EGPeppered]

Hi, i am attempting to repair a dell XPS 9360 that has no signs of life but can't find a schematic or board view.

The board part number is: LA-D841P Rev 3.0

Does anybody have anything i could use?
Many Thanks

[naseee]

Re: Dell XPS 9360 - LA-D841P Rev:3.0 schematic/boardview

shematic and boardview pdf

[shaon_kof]

thanks a lot bro

[EGPeppered]

Re: Dell XPS 9360 - LA-D841P Rev:3.0 schematic/boardview

shematic and boardview pdf

Hi
Thank you for the schematic.

[qava]

Re: Dell XPS 9360 - LA-D841P Rev:3.0 schematic/boardview

Hi
Thank you for the schematic. Everybody want money.
One of this forum which is the best

[nasnus123]

Re: Dell XPS 9360 - LA-D841P Rev:3.0 schematic/boardview

Thank you

[fikonaz]

Re: Dell XPS 9360 - LA-D841P Rev:3.0 schematic/boardview

shematic and boardview pdf

thank you

[tomodachi]

Re: Dell XPS 9360 - LA-D841P Rev:3.0 schematic/boardview

Many thanks

[hnim26]

Re: Dell XPS 9360 - LA-D841P Rev:3.0 schematic/boardview

Thank you.

[heta1000]

Re: Dell XPS 9360 - LA-D841P Rev:3.0 schematic/boardview

thanx

[CornholioGSM]

Re: Dell XPS 9360 - LA-D841P Rev:3.0 schematic/boardview

hello,
anyone have boardview in .brd please?

[AL._.EX]

Re: Dell XPS 9360 - LA-D841P Rev:3.0 schematic/boardview

hello,
anyone have boardview in .brd please?

Boardview

[CornholioGSM]

Re: Dell XPS 9360 - LA-D841P Rev:3.0 schematic/boardview

Oooooh wau thank you

[cmn.fix]

Re: Dell XPS 9360 - LA-D841P Rev:3.0 schematic/boardview

Boardview

Hi, sorry but what software do you use to open that filetype? tried openboardview and autodesk online viewer to no avail.

[Vesko356]

Re: Dell XPS 9360 - LA-D841P Rev:3.0 schematic/boardview

Hi, sorry but what software do you use to open that filetype? tried openboardview and autodesk online viewer to no avail.

BoardViewer ---> http://boardviewer.net/

.

[piernov]

Re: Dell XPS 9360 - LA-D841P Rev:3.0 schematic/boardview

.

[shaban]

Re: Dell XPS 9360 - LA-D841P Rev:3.0 schematic/boardview

Thanks

[ceut]

Hello,
I'm new here (came from Eevblog, for fixing some computer hardware 😀

First thing: thanks for the schematic ! 😎

The story:
I have a DELL XPS 9360 (french model from France) coming from my work to fix the Intel ME Bios part, which has failed without any reason after a Bios update from a fresh Windows install made with the MediaCreationTool from Microsoft 🙄
As we work professionaly with Dell, I have asked them some help, but they told me that the motherboard must be changed 🤦

I do electronics, I have a 3.3V modded CH341A which I use for mainly flashing 24Cxx Eeprom.
So I started to look at the way to flash it.
I have found this great topic here: https://winraid.level1techs.com/t/de...-disable/35154

So after analyzing and understanding the shematic(page 13 from PDF) and the boardview, I share with you the way to put this computer in Service Mode 😉
To sum up:
- remove the 0 ohm R1191 resistor
- solder a 1K resistor in the RC9 empty location
- join the 2 solder points you want on the SW1 switch (1+2=service mode, or 2+3=normal mode)

Dell Bios tells that we are in Service Mode, and I have successfully extracted the Intel ME Bios (32MB) which I have now to fix.

Some photos I have made too.
Hope you will like this post, as it is my very first here 😅