Hi,
I am also seeking documentation for this motherboard as i have a burnt u60100 as well as a shorted capacitor next to it. (located near the fan header.)
Even some measurements of the capacitor and clear photos would be a huge help.
Thanks.
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: boardview dell n5010 dg15 09909
Here is a board view i found.
Hope this helps....
Leave a comment:
-
Re: ASUS ChromeBook C434T not powering on
I have a C433t board with a different issue. I looked at the audio section and it matches your photo.
That burnt trace leads to the bottom of the left resistor in the area you circled.
If the system is still in your shop, hopefully this gives you audio back again....
Leave a comment:
-
Re: ASUS ZenBook 13 UX334FL board view
I've just measured the resistor in circuit on a board i have here. It is 25 ohms....
Leave a comment:
-
Re: Toshiba Satellite L70/S70/S75/C70-A-M3W [DA0BD6MB8D0] BIOS
Hi
As there wasn't a confirmed working firmware posted i thought i would update the thread with one i have extracted from the official firmware update
It required trimming the file but i have flashed it and can confirm it works on a Toshiba S70-A-11H PSKNEE
The firmware i have extracted is version 1.30, this is deliberate as the firmware on the system can be a mismatch for what is on the EC and do all kinds of weird stuff.
I suggest updating to 1.60 after getting the system...
Leave a comment:
-
Dell XPS 9360 - LA-D841P Rev:3.0 schematic/boardview
Hi, i am attempting to repair a dell XPS 9360 that has no signs of life but can't find a schematic or board view.
The board part number is: LA-D841P Rev 3.0
Does anybody have anything i could use?
Many Thanks
-
Lenovo Ideacentre B540 B340 Bios
If anybody is after the BIOS files for this system, here are some that i have cleaned the ME and used on a clients computer and can confirm that it works.
You will need to download the BIOS updater for different lenovo system to flash the serial umber, product ID, UUID etc..
It's also compatible with the Ideacenter B340 as well apparently but i can't confirm this.
Hope this helps someone...
-
Re: New Members - please post your introductions here
Hi, my name is Adam.
I first got into electronics when maplin had the old diy soldering kits and over the years I got into repairing pcs and other electronics.
I recently started doing component level repair when the company My job outsourced to consistently disappointed (i'll retain the names of the not so innocent)
Now I have a proper workshop and am learning many many things as my new company grows.
Hopefully I can add some useful content to the forum.
Leave a comment:
No activity results to display
Show More
Leave a comment: