BOARWİEV v schematic please help
-
Electronicman -
Re: Dag37dmbad0 rev d
Rev 1A schematic and Rev D JPEG images. -
Dag37dmbad0 rev d
I attached schem and photos.Last edited by SMDFlea; 09-26-2023, 02:28 AM.Comment
-
IdeaPad S340-15API AMD EL432/EL532 LA-H131P
Lenovo ideapad S340-15API EL432 EL532 LA-H131P photos
BIOS amcn26ww IdeaPad S340-15API + kb9022q d Super IO Bios .bin -> https://www.badcaps.net/forum/showthread.php?p=1197846...01-12-2023, 05:14 PM -
Hello team,
I have one HP 17-AB with motherboard DAG37DMBAD0 REV D. The motherboard has problem with burned IC vRAM and dead vga chipset.
When I opened it, I get 5-4 blinging error and after 3 times opens and works.
I want to use the notebook with cpu only and to deactive the vga.
Does anyone knows how to by pass the error?
I attached schem and photos.
MOD Edit - Link to Schematic https://www.badcaps.net/forum/showthread.php?t=83938
Reminder: rules and organization of this section https://www.badcaps.net/forum/sh... -
Hey everyone,
I'm currently working on a mid-70s Sharp Electronic Digital Clock Radio, Model FY-70CH. I found the service manual online, printed it out, and have been studying it for a while. My main reasons for tackling this are: (1) I want to learn electronics and figured I'd start with something I had on hand, and (2) I want to fix its issues. Right now, the radio sounds awful, has about 5V DC at the speaker terminals, and the alarm time setting doesn't work. But I'm not asking how to fix these problems.
Instead, here's what's been bugging me so far:
The schematic... -
Ii wonder if anyone can help me. I have a Acer x163w monitor which is not powering up. The PSU main capacitor's one leg had completly come off - I replaced it but the PSU is still not outputting DC. I found the monitor in questions service manual here on manuals lib but the schematic in there is a completely different - the schematic shows no mosfet to drive the transformer while the one I have does use a mosfet - also the schematic shows only one optocoupler but mine has two.
The PSU board is labelled FM-20A02-AAA made by APD as per the image below. I am trying to find a schematic for this... -
Hi guys, I'm working on a MSI Ventus RTX 4080 16G. The GPU has 12v, 5v, however what I assume is the 1.8v rail has 1.1v and what I assume to be PEX is 0v. As you may have guessed already there is no Vmem and no Vcore.
I have looked around in related forum posts for a schematic so Much appreciated if anyone can share a Broadview schematic.
Thanks.07-15-2025, 11:15 AM
Comment