hi friends
i have dh5jl la-f943p rev 1a schematic share with u
i have dh5jl la-f943p rev 1a schematic share with u
-
-
Re: dh5jl la-f943p rev 1a schematic
thank u -
Re: dh5jl la-f943p rev 1a schematic
Thank you very muchComment
-
Re: dh5jl la-f943p rev 1a schematic
Graaaaacias thank youComment
-
Re: dh5jl la-f943p rev 1a schematic
thank youComment
-
Re: dh5jl la-f943p rev 1a schematic
hi,
plese if somebody have borardview for
DH5JL Compal LA-F943P r1.2Comment
-
Re: dh5jl la-f943p rev 1a schematic
thank youComment
-
Re: dh5jl la-f943p rev 1a schematic
obrigado....tks!Comment
-
Re: dh5jl la-f943p rev 1a schematic
Thank you very much!Comment
-
Re: dh5jl la-f943p rev 1a schematic
Thank U, my friend!Comment
-
Pleas share ASROCK Q370M Schematic and Board view if available07-18-2025, 02:01 AM -
Hey everyone,
I'm currently working on a mid-70s Sharp Electronic Digital Clock Radio, Model FY-70CH. I found the service manual online, printed it out, and have been studying it for a while. My main reasons for tackling this are: (1) I want to learn electronics and figured I'd start with something I had on hand, and (2) I want to fix its issues. Right now, the radio sounds awful, has about 5V DC at the speaker terminals, and the alarm time setting doesn't work. But I'm not asking how to fix these problems.
Instead, here's what's been bugging me so far:
The schematic... -
Ii wonder if anyone can help me. I have a Acer x163w monitor which is not powering up. The PSU main capacitor's one leg had completly come off - I replaced it but the PSU is still not outputting DC. I found the monitor in questions service manual here on manuals lib but the schematic in there is a completely different - the schematic shows no mosfet to drive the transformer while the one I have does use a mosfet - also the schematic shows only one optocoupler but mine has two.
The PSU board is labelled FM-20A02-AAA made by APD as per the image below. I am trying to find a schematic for this... -
Hello, I have an issue with the motherboard. Specifically, it doesn't power on, more precisely, the POST initialization doesn't occur.
Let me start from the beginning, the motherboard suddenly stopped working one day. There are no beep signals from the speaker, and the debug LEDs are not lighting up. After inspecting it under a microscope and using thermal imaging, I didn't find anything that could be damaged.
After that, I began voltage measurements, in which I noticed the absence of VDDQ, VDDP, VTT, and VPP lines. Later, I checked if there is an EN state on these lines,... -
Hi friends, I am in need of Surface book 1703 (1st generation) schematic and boardview. Please share if any one of you have. Thanks.06-26-2025, 11:22 PM
Comment