I need schematic and boardwiev 820-2915-B
damage from liquid
thanks to all
damage from liquid
thanks to all
-
-
Re: Macbook Pro 820-2915-b schematic?
link is below
https://www.badcaps.net/forum/showthread.php?t=44413 -
Re: Macbook Pro 820-2915-b schematic?
thanks a lot !Comment
-
Re: Macbook Pro 820-2915-b schematic?
Clearly not the logic board model number. Logic board model number is just above the connector on the left.OpenBoardView — https://github.com/OpenBoardView/OpenBoardViewComment
-
Hi. Recently serviced a damaged A1466 Macbook Air. Thought to post the issues and resolution for each.
Macbook AIR Model A1466 Diagnostic 09-01-2021
Issue: Liquid damaged (beer spill) Macbook AIR will not power up.
Problems & Resolutions
1) Attached Apple magsafe power adapter. No green / no orange light. This confirms the absence of the PP3V42_G3H voltage rail. The PP3V42_G3H rail is the primary voltage rail necessary to communicate with the magsafe power adapter to report the green or orange light status to the end user....09-01-2021, 09:31 AM -
Hello everyone,
I'm currently working on a MacBook Pro A2485 and have encountered an issue with the LCD. Instead of opting for a full replacement, I'm interested in performing an in-depth repair on the LCD itself. I'm hoping to find the schematic for the LCD in order to understand its architecture and troubleshoot more effectively.
If anyone has access to the schematic or can point me in the right direction, I'd really appreciate it. My goal is to repair the components and connections within the display, rather than going for a costly replacement. I've been in the notebook...10-05-2024, 08:02 AM -
Hello everyone,
I'm currently working on a MacBook Pro A2485 and have encountered an issue with the LCD. Instead of opting for a full replacement, I'm interested in performing an in-depth repair on the LCD itself. I'm hoping to find the schematic for the LCD in order to understand its architecture and troubleshoot more effectively.
If anyone has access to the schematic or can point me in the right direction, I'd really appreciate it. My goal is to repair the components and connections within the display, rather than going for a costly replacement. I've been in the notebook... -
Got a MacBook Pro M1 Pro 16'' to rescue immediately after liquid accident - I got it in less than 30 minutes after the spill.
It got spilled from behind when the laptop was closed. It mostly affected the rear of the mainboard and the bottom of the LCD.
I quickly took it apart and washed the liquid residue off the mainboard.
The area around the UP800 had some light corrosion, but it just washed away with some IPA. Other areas looked undamaged.
The mainboard got a thorough cleaning, as did the top case and LCD connectors / cables.
Now the laptop... -
Hi. I have a lenovo 16IAH7H (NM-E231) with a small amount of water spilled on the RT8816CGQWGPU buck converter. When powering on, keyboard lights up, fans will spin slowly. CPU and GPU are getting hot. No image. Not via HDMI either.
Part number is PU4001. The liquid spillage looked minor so I cleaned it up with some alcohol and cleaned ups some crusty joints with solder and flux.
BoardView and schematic is provided. The buck converter diagram is on PAGE 107.
I'm inquiring about any troubleshooting tips like probe points to measure and such. I can...
Comment