Toshiba ps600e schematic needed.
like the title says.
OR software to reconfigure matsushita(panasonic) optical drives from "master" to "slave"
OR software to reconfigure matsushita(panasonic) optical drives from "master" to "slave"
-
-
-
Re: Toshiba ps600e schematic needed.
that is no good, i need to make the drive "slave" on a shared bus.
the only options are to swap CS0 & CS1 on the motherboard, or re-program the drive.Comment
-
Re: Toshiba ps600e schematic needed.
You might be able to cross flash the firmware.Comment
-
Re: Toshiba ps600e schematic needed.
good luck, they dont label the setting, it may be in a seperate area.
i think there is a utility to flip it - i have a similar program for lite-on drives.
it's a mixture of problems.
1: the optical bay can also hold a harddrive - so master is alocated for a harddrive, cable-select is not used.
2: it's Toshiba, they have the most cutdown bullshit bios of any early machine i'v worked on.
3: the bios has the master hard-configured as harddrive and slave hard-configured for optical - no "auto-detect"
Last edited by stj; 08-21-2018, 11:59 AM.Comment
Comment