Toshiba ps600e schematic needed.

[stj]

like the title says.

OR software to reconfigure matsushita(panasonic) optical drives from "master" to "slave"

[mielta]

Re: Toshiba ps600e schematic needed.

https://www.notebook-doktor.de/2016/...book-techniker

[stj]

Re: Toshiba ps600e schematic needed.

that is no good, i need to make the drive "slave" on a shared bus.

the only options are to swap CS0 & CS1 on the motherboard, or re-program the drive.

[SMDFlea]

Re: Toshiba ps600e schematic needed.

You might be able to cross flash the firmware.

[stj]

Re: Toshiba ps600e schematic needed.

good luck, they dont label the setting, it may be in a seperate area.
i think there is a utility to flip it - i have a similar program for lite-on drives.

it's a mixture of problems.
1: the optical bay can also hold a harddrive - so master is alocated for a harddrive, cable-select is not used.
2: it's Toshiba, they have the most cutdown bullshit bios of any early machine i'v worked on.
3: the bios has the master hard-configured as harddrive and slave hard-configured for optical - no "auto-detect"