asus x450vp boardview or schimatic

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • techkid
    Member
    • Nov 2016
    • 20
    • philippines
    #1

    asus x450vp boardview or schimatic

    any body knows this mosfet A5 ANA 9P0108 may i know the part number of this mosfet.... thanks for help
    Tags: None
    • mielta
      Badcaps Veteran
      • Apr 2015
      • 368
      • Germany
      #2
      Re: asus x450vp boardview or schimatic

      hi type a5 mosfet by google then you see many pictures from ali an d ebay

        Comment

        • techkid
          Member
          • Nov 2016
          • 20
          • philippines
          #3
          Re: asus x450vp boardview or schimatic

          Originally posted by mielta
          hi type a5 mosfet by google then you see many pictures from ali an d ebay

          yes i already but i cant fine the a5 9p0108 mosfet

            Comment

            Previous template Next

            Related Topics

            Collapse
            • AppleLover123
              Asus X712EA 3 volts after the first mosfet
              by AppleLover123
              Hey guys,

              i have a asus motherboard here and as the title says after the first mosfet (in the picture) there is nothing more than 3.15v.
              I injected 19v and max. 1 amp at the charging port and there is not voltage drop or smth. It's just taking 19v and 1 milliamp.
              Then i tried to inject 19v and max 1amp after the current sensor and there it first takes 19v and 4 milliamps and after 2 seconds it is taking nothing (no current).
              I measured on the coils on board everything seems fine. Also the main power rail is not shorted (infinite resistance).
              Now i thought something...
              12-15-2024, 07:49 AM
            • Scotchmist
              Asus GA502D keeps blowing mosfet
              by Scotchmist
              I have an Asus GA502D, it had a blown mosfet which I replaced and the laptop booted into windows, a few mins later it shut off, the same mosfet was blown. I thought maybe just a bad mosfet but same thing happened again, a few mins in windows and shuts off.

              I have removed the mosfet and can run the laptop no problem

              The MOSFET is FDPC5018SG

              Can anyone point me in the direction of what could be the cause of this, could it be the controller rt3663bc?

              Thanks
              08-24-2024, 02:23 PM
            • Herbs n spices
              Asus Pro WS WRX80E-SAGE SE WIFI BoardView Request
              by Herbs n spices
              If anyone has the boardview and can share I would greatly appreciate it! I have the repair guide, but I still need the boardview. My BMC cannot initialize, likely due to damage around the enable switch....
              05-06-2025, 08:48 AM
            • MicroSMD Lab
              ASUS ROG Zephyrus GPU Mosfet repeat failure
              by MicroSMD Lab
              The board number is GU502DU. I repaired this a couple weeks ago and it came back with the same issue, same mosfet failed (PQH9201). I'm hoping that the GPU was spared this time.
              I used the same replacement part (purchased from Mouser) and I'm certain the soldering was done properly since it took just as much effort to remove as before. What could cause this same mosfet to fail? I'm thinking if it was unsuitable then the others would fail too. I looked for similar failures on YTube and the mosfet was replaced with AOE6930 in one instance and AOE6932 in the other but it's possible that the...
              01-10-2024, 06:36 AM
            • taurtnt
              ASUS Prime Z490-P boardview
              by taurtnt
              need ASUS Prime Z490-P boardview diagram

              Hi, I have an ASUS Prime Z490-P motherboard, it doesn't start and I need the boardview diagram, if anyone can help me
              01-24-2025, 10:26 AM
            • Loading...
            • No more items.
            Working...