cobovo
Member
Last Activity: 07-28-2026, 05:45 AM
Joined: 01-31-2023
Location: Kyiv
-
Thank you!... -
This is fantastic....but no. For real diagnostic Infineon PWM controllers (in this case with ASP1405I) use IR PowIRCenter https://www.infineon.com/assets/row/...53559088d40f2d
This aplication much more useful and provide more real information withot mistakes. But reqired spesific dongle. You got some iformation with your script but you don't know how to use it. Right?
Problem with reading telemetry for exanple: can be result fault with VCC of power rail for this IC or others signals that is needed to start work in normal...Leave a comment:
-
Any repair muster dont use logs to seen electrical problem as yours. The program reposts or logs can help only in program problem when wireframe corrupted. But this not you case. As I seen you don't have a expirrence to lokete and find problem. I recomend to use profesional repair sevice....Leave a comment:
-
You not provide any real information expt that VSOC is 0V and want that others taken they fortune teller's ball and say why is happen with you. Or what?
ASP1405 can has 2 address on SMBus because programed for two power rail each....Leave a comment:
-
This is not the issue, this normal situation on working cpu and motherboard. That is mean that all pre voltage and signals is ready and motherboard is ready to the next step - power up the Vcore and the Vsoc...Leave a comment:
-
Men, before the V_SOC power up, motherboard must powered up many other voltages on the motherboard for different components. This is called power sequence. Do you have power sequece for the AMD X399 platform?Leave a comment:
-
First to check the capacitors on the PCI-E lines. If they fine, you must know that PCIE controller inside GPU...Leave a comment:
-
Can you provide more correct information? Which of them, USB2.0 connected to CPU or to B550 hub lines?...Leave a comment:
-
Sorry for delay. But mostly it can be N-transistor or maybe doble diode. You have the same SOT-23 IC so check and compare them.Leave a comment:
-
Can you download boardview here?Leave a comment:
-
When you put the CPU in socke, signals: S_SLP_S4# and S_SLP_S3# hight up to 3.3v before power button presed?Leave a comment:
-
Mostrly ic dead itself. Remove IC and check if short is gone....Leave a comment:
-
Maybe some one have or can download correct fireframe of PWM IR35217 for configuration 6 TDA21472 + 2 IR3553M mosfets?Leave a comment:
-
GIGABYTE X570I AORUS Pro WIFI IR35201/IR35217 wireframe
I got broken GIGABYTE X570I AORUS Pro WIFI . The PWM controller was burned. I replace it but dont have a full working condition because I don't have original PWM wireframe. For repair I bouhgh another but working Gigabyte X570I Aorus Pro WIFI but configuration of MOSFETs was differents. My original board have configuration is
6 (VCORE) mosfets of TDA21472 +
2(VCORE_SOC) mosfets of IR3553M.
But in the bought motherboard has only
8 (6+2) mosferts of TDA21472.
So downloded PWM wireframe not works on my motherboard after burning working IC of PWM (IR35217).
Working... -
Use this power seaqvence for gigabyte motherboard. This can help.
And some question:
1 Do you put CPU in socket?You can do it without plug 12V main CPU rail. For check the level of SLP#3 and SLP#4 signals, they must be 3.3V botch, before push POWER BUTTONLeave a comment:
-
Wow... thank you soo much!
As I know EVGA never provided any boardviews or schematics for free for his products....Leave a comment:
-
Asus Pro WS X570-ACE schematic or boardview
Can someone share the boardview for Asus Pro WS X570-ACE ... -
Re: Post help identifying capacitors here
I found same logo on Asus motherboard at DIP type capacitor and then by boardview found needs to me series and type on website of manufacturer.
This type
https://www.apaq.com.tw/zh-cn/produc...pe/ACAS+Series...Leave a comment:
-
Re: Post help identifying capacitors here
Hi guys!
Can some one to identify this type of smd capacitors from Gigabyte motherboard?...Leave a comment:
No activity results to display
Leave a comment: