Hp 15-ab532tx dax1bmb1af0 rev f schematic

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • yashjovi
    Senior Member
    • Nov 2011
    • 130
    #1

    Hp 15-ab532tx dax1bmb1af0 rev f schematic

    Hp 15-ab532tx dax1bmb1af0 rev f schematic
    hi all any one have this motherboard schematic please share

    hp 15-ab
    in this motherboard one buck controller ic is short
    ic = MT5VA i need to replace this ic but i am not able to find equivalents
    please help
    Tags: None
    • yashjovi
      Senior Member
      • Nov 2011
      • 130
      #2
      Re: Hp 15-ab532tx dax1bmb1af0 rev f schematic

      ic = MT5VA
      Attached Files

        Comment

        • yashjovi
          Senior Member
          • Nov 2011
          • 130
          #3
          Re: Hp 15-ab532tx dax1bmb1af0 rev f schematic

          Re: Hp 15-ab532tx dax1bmb1af0 rev f ic location
          Attached Files

            Comment

            • piernov
              Super Moderator
              • Jan 2016
              • 4435
              • France
              #4
              Re: Hp 15-ab532tx dax1bmb1af0 rev f schematic

              The IC is a Silergy SY8208CQNC I think.
              OpenBoardView — https://github.com/OpenBoardView/OpenBoardView

                Comment

                • redman13
                  Senior Member
                  • Aug 2016
                  • 66
                  • bangkok
                  #5
                  Re: Hp 15-ab532tx dax1bmb1af0 rev f schematic

                  DIS (14" / 15" / 17") Chocolate
                  Attached Files

                    Comment

                    • Wolverine 72
                      New Member
                      • Jun 2021
                      • 1
                      • India
                      #6
                      Re: Hp 15-ab532tx dax1bmb1af0 rev f schematic

                      Anyone know which MOSFETs are used in charging circuit of X1B DAX1BMB1AFO REV F.?

                        Comment

                        Previous template Next

                        Related Topics

                        Collapse
                        • GGEZ
                          16IAH7H minor liquid damage around GPU buck. boardiew and schematic included.
                          by GGEZ
                          Hi. I have a lenovo 16IAH7H (NM-E231) with a small amount of water spilled on the RT8816CGQWGPU buck converter. When powering on, keyboard lights up, fans will spin slowly. CPU and GPU are getting hot. No image. Not via HDMI either.

                          Part number is PU4001. The liquid spillage looked minor so I cleaned it up with some alcohol and cleaned ups some crusty joints with solder and flux.

                          BoardView and schematic is provided. The buck converter diagram is on PAGE 107.


                          I'm inquiring about any troubleshooting tips like probe points to measure and such. I can...
                          08-19-2024, 03:18 PM
                        • jm1234
                          Reolink RLC-410-5MP - buck convertor
                          by jm1234
                          Hi,
                          it's a PoE camera and it stopped working. Using thermal image I identified failing component U22 marked as 16AF which seems to be buck convertor TI https://www.alldatasheet.net/datashe...62569DBVR.html. I took it out and It is inteed shorted on the output. However, after I took it out, the resistance between the output pads (on the board) still shows 190ohm, is that bit low?
                          Another issue is, seems to me I must be missing one of the tiny resistors R810 that should make up the voltage devider for the buck convertor. Honestly I did this months ago, I cannot...
                          07-14-2025, 04:30 AM
                        • TinkerTron
                          Schematic vs. Reality: Where Are the Resistors on My Sharp Clock Radio? Model FY-70CH
                          by TinkerTron
                          Hey everyone,

                          I'm currently working on a mid-70s Sharp Electronic Digital Clock Radio, Model FY-70CH. I found the service manual online, printed it out, and have been studying it for a while. My main reasons for tackling this are: (1) I want to learn electronics and figured I'd start with something I had on hand, and (2) I want to fix its issues. Right now, the radio sounds awful, has about 5V DC at the speaker terminals, and the alarm time setting doesn't work. But I'm not asking how to fix these problems.

                          Instead, here's what's been bugging me so far:
                          The schematic...
                          3 Photos
                          03-06-2025, 02:03 PM
                        • atunguyd
                          Acer x163w Monitor PSU schematic
                          by atunguyd
                          Ii wonder if anyone can help me. I have a Acer x163w monitor which is not powering up. The PSU main capacitor's one leg had completly come off - I replaced it but the PSU is still not outputting DC. I found the monitor in questions service manual here on manuals lib but the schematic in there is a completely different - the schematic shows no mosfet to drive the transformer while the one I have does use a mosfet - also the schematic shows only one optocoupler but mine has two.
                          The PSU board is labelled FM-20A02-AAA made by APD as per the image below. I am trying to find a schematic for this...
                          03-05-2025, 02:08 PM
                        • Thetechdude
                          MSI Ventus RTX 4080 16G Broadview schematic needed
                          by Thetechdude
                          Hi guys, I'm working on a MSI Ventus RTX 4080 16G. The GPU has 12v, 5v, however what I assume is the 1.8v rail has 1.1v and what I assume to be PEX is 0v. As you may have guessed already there is no Vmem and no Vcore.

                          I have looked around in related forum posts for a schematic so Much appreciated if anyone can share a Broadview schematic.

                          Thanks.
                          07-15-2025, 11:15 AM
                        • Loading...
                        • No more items.
                        Working...