Reading Schematic?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • tablet3rs
    Senior Member
    • Aug 2013
    • 57
    • philippines
    #1

    Reading Schematic?

    hi guys...

    im wondering if there's a list of abbreviation for laptop schematics?

    i can partially read laptop schematic, but most of the time i end up guessing w/c is w/c,

    anyways... ill be very happy if you could point me out to the right direction...

    tnx...

    appreciated...

    i also google it... i found one blog... but its ancient... but helpful...
    Tags: None
    • cyberhack
      Badcaps Veteran
      • Feb 2013
      • 466
      • Uk
      #2
      Re: Reading Schematic?

      WC is defined as a water closet, or a bathroom.

      Here
      http://adiedkhazbook.blogspot.co.uk/p/blog-page_4.html
      Last edited by cyberhack; 10-24-2016, 05:17 AM.

        Comment

        • Uniballer
          Badcaps Veteran
          • Jul 2013
          • 334
          • USA
          #3
          Re: Reading Schematic?

          If you actually want help with a specific schematic then post a picture, or a link to it.

            Comment

            Previous template Next

            Related Topics

            Collapse
            • gjgib
              Help reading schematic voltages input/output
              by gjgib
              Hello, this might be embarassing since I consider it a dumb question but keeps me kinda stuck sometimes in my journey.

              I want to know if there is any post in this forum which explains my questions. A) When, where and how do I know when X voltage line is input or output. Example:


              I'm battling with this IC to understand it's voltages. It's from non-turning-on Lenovo Ideapad 3 15iil05 - NM-D461.

              I see some lines like +5VL / +5VALW / V9B+ / +3VALW being okay and some others like 1.8VALW / +0.6VS / +2.5V_DDR. I just know that some of them are bad or missing,...
              05-06-2024, 08:11 PM
            • reeluff
              DY abbreviation lenovo schematic
              by reeluff
              What is the abbreiation DY found next to components on Lenovo (maybe others) schematics. I could not find any key or anything much in a search. I deduced it might mean "do not use component" based on what i was seeing....
              11-16-2023, 07:39 AM
            • TinkerTron
              Schematic vs. Reality: Where Are the Resistors on My Sharp Clock Radio? Model FY-70CH
              by TinkerTron
              Hey everyone,

              I'm currently working on a mid-70s Sharp Electronic Digital Clock Radio, Model FY-70CH. I found the service manual online, printed it out, and have been studying it for a while. My main reasons for tackling this are: (1) I want to learn electronics and figured I'd start with something I had on hand, and (2) I want to fix its issues. Right now, the radio sounds awful, has about 5V DC at the speaker terminals, and the alarm time setting doesn't work. But I'm not asking how to fix these problems.

              Instead, here's what's been bugging me so far:
              The schematic...
              3 Photos
              03-06-2025, 02:03 PM
            • atunguyd
              Acer x163w Monitor PSU schematic
              by atunguyd
              Ii wonder if anyone can help me. I have a Acer x163w monitor which is not powering up. The PSU main capacitor's one leg had completly come off - I replaced it but the PSU is still not outputting DC. I found the monitor in questions service manual here on manuals lib but the schematic in there is a completely different - the schematic shows no mosfet to drive the transformer while the one I have does use a mosfet - also the schematic shows only one optocoupler but mine has two.
              The PSU board is labelled FM-20A02-AAA made by APD as per the image below. I am trying to find a schematic for this...
              03-05-2025, 02:08 PM
            • Thetechdude
              MSI Ventus RTX 4080 16G Broadview schematic needed
              by Thetechdude
              Hi guys, I'm working on a MSI Ventus RTX 4080 16G. The GPU has 12v, 5v, however what I assume is the 1.8v rail has 1.1v and what I assume to be PEX is 0v. As you may have guessed already there is no Vmem and no Vcore.

              I have looked around in related forum posts for a schematic so Much appreciated if anyone can share a Broadview schematic.

              Thanks.
              07-15-2025, 11:15 AM
            • Loading...
            • No more items.
            Working...