Openflex Boardview: New boardview software (linux, windows and OSX)

[passete]

Re: Openflex Boardview: New boardview software (linux, windows and OSX)

well managed to get does fz. files , it works like a charm now

thk for the help

can you share your key ? cause i have the same problem !
Thanks

[highpulse]

Re: Openflex Boardview: New boardview software (linux, windows and OSX)

well managed to get does fz. files , it works like a charm now

thk for the help

[highpulse]

Re: Openflex Boardview: New boardview software (linux, windows and OSX)

thk , so were do i can find does fz keys , and were i need to put them ?

cheers

[inflex]

Re: Openflex Boardview: New boardview software (linux, windows and OSX)

Yep, they're all relating to the lack of the FZ Key sadly.

Because it's Open source software, we cannot legally supply it with the required FZ decoding key (it's available, many people have it, but we cannot provide it).

One of those annoying issues

I might talk with piernov and see what we can do about making those "Assert" errors a little more human readable, thanks.

[highpulse]

Re: Openflex Boardview: New boardview software (linux, windows and OSX)

hey back .

let me chek hold on

so OS is windos 10
what do you mean about FZ key installed ( i usually open them on "PCB Repair Tool" and no issues and nothing needed .
sorry im not software expert here , my thing is the electronics :P so feel free to tell me what do i need

cheers

here are some fotos of the runtime errors

[inflex]

Re: Openflex Boardview: New boardview software (linux, windows and OSX)

well unfortunetly your software gives a lot of runtime error , specially it didn't open yet any .FZ file !!!

Can you give us a dump/error? What Windows OS?

Also, do you have the FZ key installed so you can decode the fz files?

Perhaps come over to the Github repo and make an issue-ticket?

[highpulse]

Re: Openflex Boardview: New boardview software (linux, windows and OSX)

well unfortunetly your software gives a lot of runtime error , specially it didn't open yet any .FZ file !!!

[piernov]

Re: Openflex Boardview: New boardview software (linux, windows and OSX)

Basic support implemented, see https://github.com/inflex/OpenBoardV...ment-244615864 .
You can grab the binaries here: https://github.com/piernov/OpenBoard...leases/tag/N10 .

[inflex]

Re: Openflex Boardview: New boardview software (linux, windows and OSX)

Thanks. There's a fellow piernov who will probably be working on that over the next couple of days. The separate file format and one of the existing brd formats are quite similar, just the one we've already done everything is consolidated in to a single file (rather than split in to separate ones).

You can keep track with development if you like at this URL -

https://github.com/inflex/OpenBoardView/issues/43

[whaldsz]

Re: Openflex Boardview: New boardview software (linux, windows and OSX)

Is that the format with multiple files (ie, pins.asc, outline.asc etc ) ?

yes, that's the one.

[inflex]

Re: Openflex Boardview: New boardview software (linux, windows and OSX)

ASC is not supported at the moment?

Is that the format with multiple files (ie, pins.asc, outline.asc etc ) ?

[whaldsz]

Re: Openflex Boardview: New boardview software (linux, windows and OSX)

ASC is not supported at the moment?

[inflex]

Re: Openflex Boardview: New boardview software (linux, windows and OSX)

Bump.

[inflex]

Re: Openflex Boardview: New boardview software (linux, windows and OSX)

Almost at 500 additional commits since the master release of OBV.

Would be nice if someone could fine-tune the dark theme on OFBV to make it feel crisper.

[inflex]

Re: Openflex Boardview: New boardview software (linux, windows and OSX)

We've switched over to a new build engine ( no longer using VS2015 for the Windows build ). New binaries available.

Interestingly, I still get a single false positive on https://www.virustotal.com/en/file/d...is/1472262260/

[inflex]

Re: Openflex Boardview: New boardview software (linux, windows and OSX)

Have now setup a proper domain and web page for.

http://openboardview.org

[mehtabbukhari]

Re: Openflex Boardview: New boardview software (linux, windows and OSX)

Hi,

Keep up the good work. It is really very useful.

[inflex]

Re: Openflex Boardview: New boardview software (linux, windows and OSX)

Latest build adds only two small changes; more transparent default top-ray for NetWeb, and add a pin-circle for pads on the underside (which make it visually easier for you to then target to flip the board at that location without losing the mental context).

[piernov]

Re: Openflex Boardview: New boardview software (linux, windows and OSX)

See https://github.com/piernov/OpenBoardView/releases for latest OS X binary, Debian package and Windows OpenGL build (may not work).
https://github.com/inflex/OpenBoardView/issues/36 is still up-to-date for Windows DirectX 9 binary.

[inflex]

Re: Openflex Boardview: New boardview software (linux, windows and OSX)

New update built. More items configurable.


* Selectable primary flip mode (viewport or mouse pointer, the latter so you can see what's under the board at the same point). Pressing shift+space/middle-mouse will flip the alternative method.

* Same-net web, connects each other pin on the same net with a line from the current pin (will probably add a nicer branching algorithm in the future to reduce the level of fan-out). Current NC, Unknown and GND nets are not drawn with this (meaningless or too prolific).

Picture showing the same-net web draw example. Fine blue lines are indicating that there's pins on the other side of the board at those locations.