Can you please upload this schematic??6050a2161001-mb-a04 schematic
thanks
thanks
-
-
-
Comment
-
Re: 6050a2161001-mb-a04 schematic
thank you very muchComment
-
Re: 6050a2161001-mb-a04 schematic
thanksComment
-
Re: 6050a2161001-mb-a04 schematic
thanksComment
-
Re: 6050a2161001-mb-a04 schematic
link down....Comment
-
Re: 6050a2161001-mb-a04 schematic
does anyone have schematic for 6050A2161001-MB-A04Comment
-
Comment
-
Re: 6050a2161001-mb-a04 schematic
rhxComment
-
Re: 6050a2161001-mb-a04 schematic
ThanksComment
-
Re: 6050a2161001-mb-a04 schematic
@SMDFlea you are the best. Thanks broComment
-
Re: 6050a2161001-mb-a04 schematic
[QUOTE=SMDFlea;951411].
Thank you.Comment
-
Re: 6050a2161001-mb-a04 schematic
Here is the file:Comment
-
Hey everyone,
I'm currently working on a mid-70s Sharp Electronic Digital Clock Radio, Model FY-70CH. I found the service manual online, printed it out, and have been studying it for a while. My main reasons for tackling this are: (1) I want to learn electronics and figured I'd start with something I had on hand, and (2) I want to fix its issues. Right now, the radio sounds awful, has about 5V DC at the speaker terminals, and the alarm time setting doesn't work. But I'm not asking how to fix these problems.
Instead, here's what's been bugging me so far:
The schematic... -
Ii wonder if anyone can help me. I have a Acer x163w monitor which is not powering up. The PSU main capacitor's one leg had completly come off - I replaced it but the PSU is still not outputting DC. I found the monitor in questions service manual here on manuals lib but the schematic in there is a completely different - the schematic shows no mosfet to drive the transformer while the one I have does use a mosfet - also the schematic shows only one optocoupler but mine has two.
The PSU board is labelled FM-20A02-AAA made by APD as per the image below. I am trying to find a schematic for this... -
Please help, i need schematic diagram for Dell inspiron 3537 board LA-9982P rev 3.0 (A02). Specific for A02.
I have a one beep with no display problem. Did reprogrammed the bios but no luck. i tried to troubleshoot using rev 3.0 (A08) version schematic and boardview but there's components/rails in the schematic that is none in my actual board, this is why I'm having problem checking every power rail needed if ok. attached is the photo of my actual board.
I'm not sure if A02 and A08 is really different schematic version from each other, but I have to try.... -
Iam looking for a Evga Gtx 780 schematic and board view.
The 780 possidon board view is not close.
Dicky96 has the schematic that would help. I seen a video on YouTube that he was working on gtx 780. If he could post the schematic that would help alot.
Thanks.01-10-2025, 01:58 PM -
BLU Dash Phone Schematic 4.0 (MT6572 IC) Schematic
MT6572 functional system is made of three parts as below:
Digital baseband function: Memory, LCM, GPIO interface, Keypad interface etc.
Analog baseband function: AUDIO（ including MIC, Receiver, Speaker） ,Camera, Video,
Ambient light and Proximity sensor, Power management, RTC, Charge control, etc.
RF function: RF transceiver, GSM/WCDMA/TD communication system, etc....11-06-2024, 07:09 AM
Comment