Hello Everyone!
If anyone does have this boardview it could help me a lot.
Thank you!
If anyone does have this boardview it could help me a lot.
Thank you!
-
Lenovo IdeaPad Gaming 3 16IAH7 Compal HLG10 LA-L911P Rev 1.0 BoardView... -
I have a Lenovo IdeaPad Gaming 3 15ACH, which has started exhibiting the well-known issues of the Lenovo IdeaPad 3.
All stress tests run perfectly, and there are no performance issues. However, the solder joints are almost certainly starting to fail. If the top two screws on the back are not screwed in, moving the screen results in a BSOD or, in some cases, a slight artifact and freeze. This is a 2023 notebook..
How can I extend its lifespan? Could reflow help?
It has ryzen 5 5500h, rtx 2050, no soldered ram.
Example of the artifacts:
...03-01-2025, 11:11 AM -
Hello, Lenovo IdeaPad Gaming 3-15IHU6 (Type:82K1) LA-L161P G0G10 Rev. 1A maybe someone have this schematic or boardview ?
Thank you -
Hi all,
I've got a Lenovo ideapad gaming 3 15IMH05 with a black screen issue. I've tried a BIOS file which i saw in another post and changed some things in a Hex editor.
So i transfered the DMI info from my original BIOS to the one i got from the post. Flashed it to the chip and the laptop was booting again but very slow post.
After a couple of boots it went back to black screen again. Tried to flash the same BIN file on it which i used before but its staying at the black screen now unfortunately.
I hope someone can help me out. Attached is my ORIGINAL... -
Hello. I have a Lenovo ideapad gaming 3 laptop. I did a big mistake, more precisely I powered a laptop with 61V instead of 19V. I found a shorted coil and injected 1v. TPS65993 is heating up. I powered it through the rectangular plug, not through USBC. It is possible that this integrated circuit has burned out. I can't find a datasheet. TPS65994 can be found at Mouser but I don't think it is a good replacement. This TPS65993 is PD controller.Thanks. Motherboard code is HLG30 LA-L916P.