asus tuf fx507zc4 boardwiev or schematic
-
Hi - I am looking to replace faders on a mixing desk from the early 1980s. They are tired and worn. I'm new at looking at schematics and would really appreciate your help and expertise on replacements.
The current faders are 88mm long with 60mm fader movement and are 10K B (which I think is a linear fader). They have been swapped out at some point (tell tale signs of additional screw holes a few mms below the top screw hole).
I think the schematic suggests 5K B faders (but as a newbie I'm not sure if I am even looking at the correct part of the schematic!?). I have... -
My friend gave me his dead laptop that smoked itself, just sitting there. I'm a EE and I've recently equipped myself with fume extraction, microscope, hot air station, etc. to handle more advanced soldering work, so I said I'd take it on "as training" to see how far I can go.
Does anyone have the motherboard schematic for an HP Pavillion x360 14-dh2034nr schematic. It has two exploded capacitors next to PU4701. (C4710, C4711).
If not a schematic, does anyone know what part PU4701 is? It seems to be a Alpha and Omega Semiconductor part, based on the logo... -
I really need help finding a schematic for the model in the subject!!
I recently acquired this old (1980's pre-camcorder) portable VCR and camera combo unit. The portable VCR docks into a tabletop tuner unit to make it part of the whole TV system.
The status of the system is: I hit power, and the VCR unit flaSHES ON for one second and then drops back to off. I found one youtube video for disassembly with good detail on how all the interconnections for the boards work. I also downloaded the sam's VCR-208 book that covers this model, but NO SCHEMATICS were in the booklet!!...11-14-2023, 04:24 PM -
Hi
Does anyone have the boardview and schematic for a Gigabyte X570 Aorus Pro rev 1.0 please? I see there is a boardview for the WiFi version of this board on here but no schematic.
Thanks -
Hi everyone, can anyone help me to find the Gigabye GA-M57SLI-S4 motherboard Schematic And Boardview. I am attempting to diagnose an ALC883 Audio codec, I have replaced the Audio IC with a new one, however the problem was not solved. I believe that if i am able to get hold of the Schematic And Boardview it will shed some light on BITCLK 24Mhz, and SYNC 48kHz clock that are both missing from the Audio IC, after powering on. I think it might have something to do with the clock IC.
Thank you in advance for your help.
Comment