New Members
Please consider donating to this site if it has helped you. We rely on these donations.
Please also introduce yourself here Introduce yourself here.
And finally, Read the Forum rules here.
i did change the tokin, winbond, flashed bios. i also swapped cpu, the memory as well, still the same.
checked inductors looks ok and some caps around the socket, but not the 8 legs ic, because i don't which one is connected to cpu. but never desolder the inductor yet, may be the value is low.
it runs normally, just shutdown when reach the logo.
the customer fulled out the unit, because i promised that i can fix it for 2 days, but i did not make it, i thought it was just a tockin. bad promises!
Comment