Re: HP DV6 6080ep - GPU ATI
Great job magneh!
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: Acer Aspire 5520 after reball
If your client wants to spend some money for the chip, go ahead and buy it. The chip is dead.
Leave a comment:
-
Re: Dell Inspiron 1545 keep restarting
Is the charger original? Try to run it without a Hdd, wifi and odd then go to bios setting. Use charger only. observe for 10 minutes.
Leave a comment:
-
Re: Dell Inspiron 1545 keep restarting
Could be the charger is the problem, check the output voltage of the charger if its stable?
Leave a comment:
-
Re: HP DV6 6080ep - GPU ATI
If you can't install the driver of the old chip after you reflowed or reballed it, you must replace it.
Leave a comment:
-
Re: HP DV6 6080ep - GPU ATI
check this out
[url]http://forums.guru3d.com/showthread.php?t=363233[/url]Re: HP DV6 6080ep - GPU ATI<br /> <...t=363233[/url]
Leave a comment:
-
-
Re: Hp Pavilion Dv6 display fail
@pravin6p>> Next time make your own trade.
If the fan spin in full speed, reflow the cpu socket.
Leave a comment:
-
Re: Sony MBX-215 M930 REV 1.2 Laptop Motherboard fraud by Red sun Technology Co.,Ltd
Next time you buy from AliExpress, first look for diamonds or buyers feedback before placin order.
Thanks for sharing!Last edited by jtamad44; 04-04-2014, 08:38 AM.
Leave a comment:
-
Re: Hp dv5 amd sometimes shutdown
You can use EDS brush if you have or tooth brush with isopropyl alcohol 99%.
[url]http://sra-solder.com/product.php/7010/40/aoyue_9070_ultrasonic_cleaner_for_circuit_boards[/url]Re: Hp dv5 amd sometimes shutdown<br...t_boards[/url]Last edited by jtamad44; 04-03-2014, 07:35 AM.
Leave a comment:
-
Re: Hp dv5 amd sometimes shutdown
try to clean the board w/ ultra sonic cleaner, could be contact problem
if the problem persist, change the rtc battery and update bios.
Leave a comment:
-
Re: need soldering tips please
the proper tool to remove usb port or headphone jack is soldering iron station, but not just soldering iron station, but the good one, you save power as well. hot air or bga rework station inappropriate for these tasks.
Leave a comment:
-
Re: HP DV6-133sa - No Output Sound
WD-40 then put the jack in n out several times.
Leave a comment:
-
Re: hp pavilion dv2-1106au
if its gpu chip problem, you need replace it, reball won't last.
Leave a comment:
-
-
-
Re: copmaq cq40 no diosplay
uneven heat could deform the cpu socket. make sure you have elstein ceramic up and down to do it.
its better to reflow cpu socket than reball it, if this is your first time....
Leave a comment:
-
Re: Siva Institue laptop troubleshoot videos
The guy is prof. you should learn for him....
Leave a comment:
No activity results to display
Show More
Leave a comment: