Please schematic for ACER laptop mainboard DAZAUIMBC0 Rev C and Broadview if available
-
Laptop data:
NTB Acer An517-51 FHD
i7-9750H
16GB replaced with RAM Crucial Ballistix SODIMM DDR4-3200 32GB K2 SW
1TB SSD
RTX2060
Bon soir dear online techies, enthusiasts, modest helpers and whomever I might have forgotten!
Search gave me no hits so this is my first post.
My Acer 5 Nitro mainboard had a short circuit when I tried to plugin a USB device. Some smoke rose from the port and it became super hot a that point of entry/exit. Warranty was of about a month.
Since I am on a low budget I cannot afford to buy... -
Ii wonder if anyone can help me. I have a Acer x163w monitor which is not powering up. The PSU main capacitor's one leg had completly come off - I replaced it but the PSU is still not outputting DC. I found the monitor in questions service manual here on manuals lib but the schematic in there is a completely different - the schematic shows no mosfet to drive the transformer while the one I have does use a mosfet - also the schematic shows only one optocoupler but mine has two.
The PSU board is labelled FM-20A02-AAA made by APD as per the image below. I am trying to find a schematic for this... -
Hi, did not found here so uploading to help...09-15-2025, 07:40 AM -
Hi guys, I'm working on a MSI Ventus RTX 4080 16G. The GPU has 12v, 5v, however what I assume is the 1.8v rail has 1.1v and what I assume to be PEX is 0v. As you may have guessed already there is no Vmem and no Vcore.
I have looked around in related forum posts for a schematic so Much appreciated if anyone can share a Broadview schematic.
Thanks. -
Hi there all, Merry Christmas and Happy New Year!
Looking for advice, Need to restore/fix the damaged Acer Aspire 514 -54 power circuit pathways.
I am not good at reading schematics and have difficulty finding the board viewer schematic or simple schematic for damaged parts, but I have all the tools and experience for micro-soldering. All I need to figure out is which ends (from-to) and trace wires to restore lines.
Hope the pictureS are clear enough to see the problem...
Comment