NEC versa pro vy16g/w-4 schematic need

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ashan000
    Member
    • Jul 2022
    • 34
    • Sri lanka

    #1

    NEC versa pro vy16g/w-4 schematic need

    hello every one.. I have old laptop.. NEC versa pro vy16g/w-4
    Can anyone have Schematic for this motherboard.? I couldn't find on internet.
    board number is "danr3cmb6b0"

    fault is no charging issue
    Attached Files

Related Topics

Collapse

  • ianpoultonknights
    Zenbook Flip 15 UX562AI schematic
    by ianpoultonknights
    Had one of these come in for repair with a blown battery and a WiFi issue, battery has been replaced with genuine battery (twice) and won't take a charge works fine on AC, WiFi issue gone away. Looking for a schematic so I can trace the charger circuit UM562F is only one I can find, this is the 562AI model.Had a unit come in for repair — 562AI model — with a blown battery and WiFi issue. WiFi fault has cleared, but battery won’t charge despite replacing it twice with genuine parts. Device operates fine on AC power. Suspect charger circuit fault. Only schematic I’ve found so far is for...
    06-26-2025, 02:41 PM
  • gjgib
    Issue with DELL 1545 IO CHARGE BOARD --SCHEMATIC-- (explained with images)
    by gjgib
    Hello, need help identifying a DIODE that's right at the start of DC_IN line in this small IO BOARD. (DR1 08530-2 48.4AQ03.021).



    I have the boardview for this small board 08530-2.rar but it doesn't specify any components, just 'D1', 'Q2,Q3', etc. That's why I'm looking for the -schematic-. PS: It's in some paid sites.




    The blown diode that came in this board was this one: CH9k-B14A

    So I bought a tape of 50- 1SMB14A LK and replaced the blown one with a new 1SMB14A LK but the diode gets too hot. Did I purchase the wrong diode?...
    05-02-2024, 02:53 PM
  • Victor Moreira Silva
    Acer Nitro 5 LA-L181p power LED turns on by 5 secs (Short on PCH rail?)
    by Victor Moreira Silva
    Hello everyone,

    I'm trying to repair my old Acer Nitro 5 (AN517-54-55T5). I've already bought a new laptop, so this is more of a learning project. For the experience, with no high expectations of success.

    Well, my decice specs are the following:

    Model: Acer Nitro 5 AN517-54-55T5
    CPU: Intel Core i5-11400H
    GPU: NVIDIA GeForce GTX 1650
    Motherboard: GH51G LA-L181P Rev:1c

    The symptom:
    When pressing the power button, the power LED lights up for about 5 seconds and then turns off. Initially, the issue was intermittent: sometimes...
    05-26-2025, 10:49 AM
  • rounin
    MacBook Air A2337 (820-02016) USB-C Port Issue – Only Works in One Orientation (CC Line Problem?)
    by rounin
    Hi everyone,

    I'm working on a MacBook Air 2020 (A2337, board 820-02016) and running into a strange USB-C issue. I've gone through quite a bit of testing and part replacement, but I'm stuck — hoping someone here can shed some light.

    🛠 Original Issue
    The machine initially wouldn't negotiate 20V over USB-C — stuck at 5V.
    Diagnosis showed PP1V5_UPC0_LDO_CORE shorted to ground.

    I replaced U3100 (UF400) using a donor board (A2179), and the machine powers on fine now.

    ⚠️ New Problem: One USB-C Port Only Works in One Orientation...
    04-19-2025, 01:18 AM
  • Grouickman
    Hofmann geodyna 6300 Wheel balancer
    by Grouickman
    Hi there,

    First, I'm not sure it's the right section to post for this type of device, but could not think of something better.

    Ok, so my son (a mechanic) bought a faulty Hofmann Geodyna 6300 wheel balancer (which appears to be mostly a re-branded Snap-on wheel balancer).

    I'm looking for any resources (doc, manuals, schematics) that would be available for this device or anyone that would have any knowledge on this particular device (or its Snap-On equivalent).

    I'm trying to diagnose the fault(s ?), but I can't find any schematic (appart from the...
    03-31-2025, 05:29 AM
  • Loading...
  • No more items.
Working...