Hello fam
Please I would like to request for
HP 15-F337WM DAU99VMB6A0 REV A schematics
Thanks in advance.
Please I would like to request for
HP 15-F337WM DAU99VMB6A0 REV A schematics
Thanks in advance.
-
-
Last edited by AL._.EX; 09-21-2023, 12:18 PM. -
Re: Schematics
Only boardview Quanta U99Comment
-
Re: Schematics
Thanks I really appreciateComment
-
Hello, everyone!
I need schematics of this board:
Model: Dell Inspiron 14z-N411z
Board No: DA0R05MB8D2
REV: D
Quanta project: R05
I have already seen the file ''quanta R02_UMA.pdf'' in this thread:
https://www.badcaps.net/forum/showth...dell+14z-n411z
but it is differ from R05_UMA and it can't help me in my case.
The main problem of the laptop is as follows:
LED backlight is absent in the screen and appropriate 36's contact of the LVDS 40pin 1ch connector is shorted... -
Compressed schematic and boardview attached....05-15-2024, 12:38 PM -
Anyone having schematics of Quanta KR1 - motherboard of Sony VAIO TAP 11? I'm in the pursuit of how is the RF Module VGP-WRC9 interconnected with the CPU. I have some documentation of the RF Module at hand, but not of the motherboard.01-01-2021, 04:15 PM -
I have an HP gaming 15-0013dx laptop , motherboard quanta G3HA with AMD Ryzen 5 cpu and Nvidia discrete grsphics card. The laptop turns on and u can see the screen polarizing on and off in a loop but no video signal. All voltages are ok measured and stable (I checked all with oscilloscope). This schematics don't have power sequence but I'm using a similar sequence from another laptop with AMD CPU and I get all to the point CPU must release apu_pwrok and apu_rst#, this signal comes valid only for the period of time the screen is polarized and they disappear and same loop behaviour (active/inactive).... -
Hello Everyone,
I will be really grateful if someone shares schematics and if possible the boardview of the old Asus Nexus 7 (2012) Tablet. The motherboard is ME370T Rev. 2.4. Now I can find schematics for the Rev. 1.0 but I could not find the schematics for the Rev 2.4. I tried to look for similarities in the Rev. 1 but there are somethings missing, plus the board i have has nearly no component names printed on it which as a newbie makes pretty hard for me to locate things. Any assistance will be appreciated. Thank you.
Comment