please help remove password dell lat.5320-8fc8

[ELOUALI]

Update bios, see if it goes from 62LTJL3-0001 to 62LTJL3-8FC8.

OK, thanks, I'll try this tip and you'll get my feedback.

[ELOUALI]

Update bios, see if it goes from 62LTJL3-0001 to 62LTJL3-8FC8.

Hello, I just tested the file, but it didn't work (the machine boots without any BIOS errors) but it doesn't display any images.
For the original BIOS, I think there was a master code lock option that was enabled. That's why the suffix, instead of being 8fc8, was converted to 0001, and that's what caused the problem, I think.

[hoaca388]

Hello, I just tested the file, but it didn't work (the machine boots without any BIOS errors) but it doesn't display any images.
For the original BIOS, I think there was a master code lock option that was enabled. That's why the suffix, instead of being 8fc8, was converted to 0001, and that's what caused the problem, I think.

0001 is the old suffix, 8fc8 is the new suffix.
Try clear ME file. Give it at least 30 minutes.

[ELOUALI]

0001 is the old suffix, 8fc8 is the new suffix.
Try clear ME file. Give it at least 30 minutes.

I have an update for my case:
The original chip is w25r256jven, on my workbench I have another chip with ref: w25q256jven with which I test the files or in case there will be a dump problem I only put back the original chip that I removed, so so far everything is fine, I did some research and I saw that there is a difference between w25q and w25r so I looked for a w25r in my junkyard and I found one, the weird thing in all this is that when I dump the original chip and I put it on the w25r the machine starts and goes into screen test mode and when I remove it and I put the original chip the machine starts normally and accesses windows without any problem, the dump I checked several times with verty and rt and it is identical, if anyone has an explanation?

[ELOUALI]

0001 is the old suffix, 8fc8 is the new suffix.
Try clear ME file. Give it at least 30 minutes.

Hello, I followed your instructions, but unfortunately after a while the machine turns off by itself and nothing happens.
If anyone has an explanation for my case, I would be grateful. Why when I rewrite the dump extracted from the bios chip on a new one with the same reference, the machine instead of booting on Windows, it boots in screen test mode?

[ELOUALI]

Unlocked

Update: First of all, I thank you for your kind generosity and I want to inform you that this file has been fully functional since the beginning. The mistake I made and realized later is that you should not change the original chip for another one even if they are identical, they can cause problems for a reason that I do not know until now, I got used to not rewriting on the original chip to avoid a bad extracted file and that's where it all started.
Finally, I thank all the great people I met here, you are truly the best.

[MrShinyX]

Hi guys,

I have a Dell Latitude 5320 that i have forgotten my BIOS admin password on, is there anyway to get a master password or would it be reading the BIOS chip manually?

Service tag: 6PKWCL3-8FC8

Thanks in advance

[SMDFlea]

Thread merged.

[shiyab]

Hi guys,

I have a Dell Latitude 5320 that i have forgotten my BIOS admin password on, is there anyway to get a master password or would it be reading the BIOS chip manually?

Service tag: 6PKWCL3-8FC8

Thanks in advance

ss post backup bios

[MrShinyX]

ss post backup bios

i have my ch341a kit coming tomorrow, i will create a dump and post here. thank you

[MrShinyX]

ss post backup bios

Hi,

Sorry for the delay, just wasnt not able to get around it till today. find the bin file attached. would really appreciate it if it can be unlocked.

Thank you in advance

[LBTT1121]

Hi,

Sorry for the delay, just wasnt not able to get around it till today. find the bin file attached. would really appreciate it if it can be unlocked.

Thank you in advance

Backup Bios 32Mb , 25Q256......