-
-
good evening everyone, I need help, I have a problem with HP Elitebook 840 G5, with this error message on startup (hp endpoint security controller problem bios), I made a backup of the bios, I attach the file, thank you very muchComment
-
Type and post the laptop serial number .... https://www.badcaps.net/forum/troubl...before-postingComment
-
↵
Any donations to badcaps are welcome, click this link to donate . Thanks to all the supporters
https://www.badcaps.net/donateComment
-
perfect, thank you very much it worked, I reload a new backup because I still have some problems, I configured everything, but it still freezes on an MPM screen, I entered all the values in the bios recovered from https://partsurfer.hp.com, not I understand how to pass this errorComment
-
↵
Any donations to badcaps are welcome, click this link to donate . Thanks to all the supporters
https://www.badcaps.net/donateComment
-
HP Elitebook 840 G5 Endpoint Security Controller Problem
please help me
SN/-5CG9083C61
ProdID 5FE00UC#ACFLast edited by sinan19; 01-03-2025, 04:09 AM.Comment
-
↵
Any donations to badcaps are welcome, click this link to donate . Thanks to all the supporters
https://www.badcaps.net/donateComment
-
NO DISPLAYComment
-
HP 840 G5 no display. Kindly fix. Hope it will not bring security device error
S/N 5CG9262H4G
PN; 5TG90PCComment
-
Endpoint Security Controller Problem
HP 840 G5
SN 5CG851B55NComment
-
Merhaba yardım lütfen!
HP Elitebook 840 G5 Endpoint Security Controller Problem
SN:5CG9235L52
PN:5FV12EP#AB8Comment
-
teşekkürler
Feature Byte
System Board Ct Number
ithiyaç varComment
-
Hi, I have a problem with my HP EliteDesk 705 G5 Small Form Factor computer on amd . Standard corrupted bios probably corrupted during the update. I have uploaded a clean dump from the manufacturer's website with the latest version but when I turn it on a message appears :
HP Endpoint Security Controller problem
there is a problem with the hp endpoint security controller on the unit
I tried restoring the bios security to factory defaults after the first switch-on because this helps with intel-based laptops. Here unfortunately this did not help. Does anyone have... -
Notebook HP ProBook 450 G8
ProdID 2K8L1LT#AC8
Mother: DAX8QAMB8D0 REV D
The device had bootloop issues. I reprogrammed the EC BIOS and the main BIOS, extracted from an HP 440 G8 with the same motherboard, and I was able to start the device. However, every time I turn it on, I get the error 'There is a problem with the HP Endpoint Security Controller in the unit.' I tried disabling several security options in the BIOS, but the error still appears. Additionally, when I attempt to update the BIOS, both BIOS chips get corrupted again....03-10-2025, 07:12 AM -
Hi! Please help with Endpoint Security Controller Problem, sending old not working dumps. Thankyou
and there is no soud after flashing new bios, may be have some solutions?
ProdID: 4YD62AV
SN: 2TK9500V8X... -
After removing the password I get an error "There is a problem with hp endpoint security controller on the unit". I read that I need a modified BIOS. There are 3 ISP on my board.
Mainbard model:6050A3044201-MB-A01 (A1)
Serial Number: 5CG0275ZLV
(I'm not allowed to upload files with the extension bin, so I upload zip)... -
Hi all,
I got a used HP and see this well known HP Endpoint Security Problem Screen. Someone seems to have removed the password and reflashed the bios with (maybe) a wrong serial etc.. I was able to read and write with my programmer a new bios onto it - same problem. I tried a downgrade, same.
I did password removal wir rcunlocker on several other machines without any problem. But this one is/was killed before. Appreciate any help.
SN: 8CC1120Z0V
PN: 8WY18AV
Bios Dump:
Thanks a lot...
Comment