Please does anyone have A1932 and A2179 T2 Clean ROMs?
Please does anyone have A1932 and A2179 T2 Clean ROMs? Please do not post the ones that come in T203. Those don't work for me. Thanks.
-
Hi.
Long shot but does anyone have a schematic & boardview for the audio board+power button on a Macbook A2179?
There is a shorted cap on mine and I need to know if I can safely remove it or whether I need to replace it and with what capacitor.
Many thanks. ...08-21-2025, 02:38 PM -
hi
i whant unlock macbook pro A1932 2019 whit ibridge 9,3 ;
i change efi files find on files mina T2 activator 1,4 and use for activation mina T2 activator 1,3 , but fault ssh?
i use mina T2 ramdisk activator 1,0 and 3,0 . but whon t work ?
have you other programme or method compatible whit this macbook ibridge 9,3 for bypass ?
I need help or information?
Does anyone have the minat2 activator 1.4 software?
Or did they use it for bypass macbook air 2019 a1932 with new ibridge 9.3?
Thank yo...03-12-2025, 10:14 AM -
Macbook A1932 had completely dead keyboard. I found liquid damage on circuitry on keyboard itself, and repaired it by replacing what i think was a 10k 0201 resistor (here's my post requesting schematic for keyboard circuitry where I included a photo of the resistor: https://www.badcaps.net/forum/troubl...ic-820-01294-a)
Now most of the keyboard works and I can login, but the following keys don't work: Delete, "/', left... -
Can anyone help with a schematic and board layout for the keyboard 820-01294-A in Macbook Air A1932 please? (for reference, mainboard is 820-01521-A)
Alternatively, I'd settle for confirming value of a resistor on the keyboard (red arrow in picture below)
Water damage keyboard, with corrosion visible on the noted resistor (picture was taken after cleaning). One pad under the resistor was corroded and resistor fell off while clearing the potting resin (or whatever it is Apple has coated the components in).
By chance I discovered that mainboard 820-02443 has...03-22-2024, 11:57 PM -
hi there , in this A1932 - Air 13 Retina 2018 820-01521, there no screen , no backlight.
no liquid damage.
i have change the lcd flex ,
tested with a working lcd screen but no display , no backlight.
hdmi over usbc is ok .laptop is working .
the same.
here measurement- PP3V3_LCD = 3,3 V
- PP5V_LCD = 5 V
- I2C_SDA_TCON / I2C_SCL_TCON = 3,3 V (no oscilation)
- LCD_PWR_EN = 5 V
- LCDBKLT_EN_L = 12 V
- EDP_BKLT_EN = 0 V
- IPD_LID_OPEN = 1.8 V