Lenovo flex 5-14alc05

[okimo]

Re: Lenovo flex5 14alc05



try. Flex 5-14ALC05 Laptop (ideapad) - Type 82HU
.

Thanks ,works great

[SMDFlea]

Can someone help me with my lenovo flex 5 14lc05
no display caps lock on
model 82hu
s/n pw0419kk
LC56-14A SVT
448.0MD07.0011

Everything you need is at post 34 .Any problems let us know.

[deansanity16]

Can someone help me with my lenovo flex 5 14lc05
no display caps lock on
model 82hu
s/n pw0419kk
LC56-14A SVT
448.0MD07.0011

[ZixuTech]

Thanks SMDFlea, managed to flash it.

[SMDFlea]

Thanks for this SMDFlea

Unfortunately neither NEoProgrammer with your updated chiplist nor AsProgrammer detects this IC

try to read it as 25Q128JW .Are you using a 1.8V adapter ? ,if so and it won`t read the chip may be bad.

[ZixuTech]

Thanks for this SMDFlea

Unfortunately neither NEoProgrammer with your updated chiplist nor AsProgrammer detects this IC

[SMDFlea]

Thanks SMDflea
I should have specified that this is with the ic desoldered and placed on a SOP socket on 25xx side
I have tried with the clip initially, but hasn't detected it. Unless that clip damaged the chip somehow. :/

Where the XM25QH128A IC on that socket reads fine, but gives me this error when programming XM25QH128A with GJCN27WW.bin or W25Q128FW_dump.bin from another but same board numbers.

22:40:05
Programming memory(verifying)... Main Memory
Verification error on address: 0x00000000, Device: 0x00, Buffer: 0x02
Execution time: 00:00:00.032
Current programmer: CH341 Black

Seems there is no W25Q128JW on the CH341 Black list. Has anyone come across new list updates? My NeoProgrammer 2.2.0 Chiplist is from 29/09/2021

You can add new chip support to NeoProgrammer https://www.badcaps.net/forum/troubl...41a-programmer

Attached is ASProgrammer 2.1.2 ,it has pretty good XMC support.
Attached is my NeoProgrammer chiplist ,the 25Q128JW is supported.

.

[ZixuTech]

Thanks SMDflea
I should have specified that this is with the ic desoldered and placed on a SOP socket on 25xx side
I have tried with the clip initially, but hasn't detected it. Unless that clip damaged the chip somehow. :/

Where the XM25QH128A IC on that socket reads fine, but gives me this error when programming XM25QH128A with GJCN27WW.bin or W25Q128FW_dump.bin from another but same board numbers.

22:40:05
Programming memory(verifying)... Main Memory
Verification error on address: 0x00000000, Device: 0x00, Buffer: 0x02
Execution time: 00:00:00.032
Current programmer: CH341 Black

Seems there is no W25Q128JW on the CH341 Black list. Has anyone come across new list updates? My NeoProgrammer 2.2.0 Chiplist is from 29/09/2021

[SMDFlea]

i am dealing with 74M12JWSIQ which doesnt get detected.
IC not responding
Suspecting faulty ROM. Any recommendations as replacement?
Would Any 1.8V 120 Flash size would work?
XM25QH128A I have here seems to be 3.3V

It doesn`t get detected because you are doing something wrong or the chip is not in the support list. Don`t assume it`s a fault ROM just because you can`t read it. Choose a different chip that is in the list for example W25Q128JW (1.8V) and try reading it again. If you`re using a clip or pogo adapter it`s not the most reliable way, desoldering the chip and putting it in or on an adapter is the best way.

[ZixuTech]

i am dealing with 74M12JWSIQ which doesnt get detected.

IC not responding
Current programmer: CH341 Black

LC56-14A SVT
203021-1

Suspecting faulty ROM. Any recommendations as replacement?
Would Any 1.8V 120 Flash size would work?
XM25QH128A I have here seems to be 3.3V

[Luis Celis]

Flex 5-14ALC05 Laptop (ideapad) - Type 82HU

Thank you so much!

[SMDFlea]

https://www.badcaps.net/forum/troubl...95#post1769295
https://www.badcaps.net/forum/troubl...07#post3681307

[hoaca388]

Hello, i flashed this and my system worked, dont know if i need any information from the original bios, but i will upload and if anyone can help id appreciate it. Thank you in advance. Originally before flashing it was flashing power button and fan would spin full speed but nothing on the screen.
SN: PW00Z70S
MTM: 82HU00JPUS
MO: PWN0B2118004

Flex 5-14ALC05 Laptop (ideapad) - Type 82HU

[Luis Celis]

Re: Lenovo flex5 14alc05



I hope it works fine.

Hello, i flashed this and my system worked, dont know if i need any information from the original bios, but i will upload and if anyone can help id appreciate it. Thank you in advance. Originally before flashing it was flashing power button and fan would spin full speed but nothing on the screen.
SN: PW00Z70S
MTM: 82HU00JPUS
MO: PWN0B2118004

[SMDFlea]

Great, well done :-)

[Shako]

Everything you need is at post 34 .Any problems let us know.

I made it . Thanks al lot.

[SMDFlea]

Hi guys. Can you please fix my corrupted bios for Lenovo Ideapad Flex 5 14alc05

SN: PW011TTK
MTM: 82HU0133GE
MO: PWN0B212400C

And could you please make it so that I keep my original serial number. Thanks in advance.

Everything you need is at post 34 .Any problems let us know.

[Shako]

Hi guys. Can you please fix my corrupted bios for Lenovo Ideapad Flex 5 14alc05

SN: PW011TTK
MTM: 82HU0133GE
MO: PWN0B212400C

And could you please make it so that I keep my original serial number. Thanks in advance.

[SMDFlea]

Hi,

I'm trying to fix my daughter's Lenovo IdeaPad Flex 5 14ALC05, the screen simply stays black and the Esc and Capslock LEDs are lighting up, fan is on.

S/N: PW023V0L
MTM: 82HU00MTIX
MO:: PWN0B2511006

I dumped the bios with my CH341A but it seems that the bios is "empty". I don't know how to recover the DMI

Can anyone help me?

Thanks

Make more backups and compare them. Are you using a clip, is the chip supported

[AHSAN TARIQ]

Hi,

I'm trying to fix my daughter's Lenovo IdeaPad Flex 5 14ALC05, the screen simply stays black and the Esc and Capslock LEDs are lighting up, fan is on.

S/N: PW023V0L
MTM: 82HU00MTIX
MO:: PWN0B2511006

I dumped the bios with my CH341A but it seems that the bios is "empty". I don't know how to recover the DMI

Can anyone help me?

Thanks

try post number 279 it tested and 100 work bios