Hi , anybody has Bios for this laptop?
-
-
Re: Toshiba satelitte L50-C-1RX BIOS
https://www.badcaps.net/forum/showthread.php?t=103570
You MUST:- Read BIOS guides, methods, resources and tools
- Try the method at BIOS guides, methods, resources and tools before requesting help
- Explain you were not able to succeed with the methods at BIOS guides, methods, resources and tools
- Use search function in case someone already answered your request
- Post under a related thread if it exists
- Provide the full machine model number and the board model number (see https://www.badcaps.net/forum/showthread.php?t=88758 )
- Name your thread with model numbers and request
- Provide a BIOS/EC dump if possible
- Attach files directly to your post instead of linking to external websites
-
Re: Toshiba satelitte L50-C-1RX BIOS
Hi there, yes I have red all this and tried all this metod from your post. Problem is that there is no bios on internet for this laptop and mine was filled with FF FF when I red it with my tl866 II plus, so I wanted to know If anyone has this. There are few posts online but doesn't working. Here is an example:
https://www.wimsbios.com/biosupdates...ATELLITE_L50-C
Please tell me what to do next.Comment
-
Need Toshiba Satellite L50-C-1RX BIOS
Hi, does anyone have bios image for this laptop. Mine was completly erased by electric shock.
Thanks in advance.Comment
-
Re: Need Toshiba Satellite L50-C-1RX BIOS
Everything else is good on notebookComment
-
Hello everyone,
I’m currently working on a dead MSI GP75 Leopard (MS-17E71) motherboard (i7 CPU, NVIDIA GPU) with a no display/no backlight issue initially. After extensive investigation, I’m at a critical stage involving EC firmware, BIOS/ME region interaction, and possible deep corruption. I'm seeking advanced insight from anyone with experience in EC/BIOS sync issues or PCH-level behavior. Here’s a full breakdown:
🧩 Initial Issue- Board powers on (fans spin, keyboard lights up and can be adjusted, caps lock led lights), but no display or backlight
- External display (HDMI) shows
07-24-2025, 02:17 PM -
Hello everyone,
I am requesting urgent assistance to unbrick my laptop, a rebranded TongFang GK7MRFR chassis. The laptop is completely dead following a faulty in-OS EC flash attempt.
I have successfully used a CH341A programmer and can read/write/verify both flash chips, but using my backups/extractions has failed to restore power. The root cause is likely a corrupted Intel Management Engine (ME) region or an incompatible EC/BIOS pairing. System & Hardware Details- Barebone / Chassis: TongFang GK7MRFR
- MB: MB: GK5MP5X V1.0 Prod :GK5MRFV10T04201310281
- Rebrand: PC Specialist
-
Hello everyone,
I recently bought a non-working Asus Zenbook Pro Duo OLED UX8402ZA that was listed for parts only. The seller mentioned that it had no display output but that the charging lights worked.
When the laptop arrived (without a charger and SSD), I connected a charger and confirmed with a multimeter that it was charging the battery. However, when I tried to power it on, only the backlight of the secondary display came on. There was no image, and it didn’t boot into the BIOS.
I decided to try flashing a new BIOS, but since I didn’t want to desolder... -
Product Name: Razer Blade 15 (2022)
Product ID: RZ09-0421
Motherboard: CH580
BIOS Versions I work with: 2.02 & 2.06
Bios File Size: 32,768 KB
Dear Forum Readers!
I'm looking for a BIOS modder or anyone with experience who would give me suggestions about my razer blade's BIOS settings.
I can view and edit the content of the BIOS .bin file with AMIBCP BIOS editor.
The BIOS files I'm working with are from badcaps.net and those are CLEAN BIOS files (anyone can find it with the search string: RZ09-0421).
!!! MY RAZER BLADE...11-24-2025, 05:52 PM -
Hi, my laptop wont boot at all
With original bios no POST, only LED lights
With alternative BIOS from model TP500LN (flashed via programmer) the notebook works again
Some issues
A- with bios from 500LN, it won't update from bios of model 500LA (from 500LN v203 to 500LA v300)
B- If updated from 500LN version 203 to 300, the battery stops being recognized
Things I tried
1- Update / clear ME: Took the non working bios, made a backup, and did this: https://www.badcaps.net/forum/troubl...theory/trouble...
Comment