lenovo l14s g2 mec1503 pinout

[ilias7790]

lenovo l14s g2 mec1503 pinout

[evserv]

Re: lenovo l14s g2 mec1503 pinout

This chip is not yet supported by any programmer

[ilias7790]

Re: lenovo l14s g2 mec1503 pinout

SVOD 3 programmer

[evserv]

Re: lenovo l14s g2 mec1503 pinout

where is it written that the SVOD can work with this chip?

[hoaca388]

Re: lenovo l14s g2 mec1503 pinout

SVOD 3 , SVOD 4 programmer has not seen support for MEC-1503 chip.

[ilias7790]

Re: lenovo l14s g2 mec1503 pinout

written jetag ?

[kimrocco]

Re: lenovo l14s g2 mec1503 pinout

Any news for this ec

[lailus]

Re: lenovo l14s g2 mec1503 pinout

anyone owns lenovo MEC1503 diagram ?

[JOHNLAG7]

Re: lenovo l14s g2 mec1503 pinout

anyone owns lenovo MEC1503 diagram ?

I have try to read with svod3 but no luck if anyone can help please reply.

[MuhendisBey]

Re: lenovo l14s g2 mec1503 pinout

Is there any up-to-date information on this topic?
Thank you.

[azanwaqas771]

Re: lenovo l14s g2 mec1503 pinout

hi every one have any idea how to remove
T14 Gen 2 MEC 1503 password

[gsm4all]

Re: lenovo l14s g2 mec1503 pinout

j-link segger can operate with mec1503

[wuyaping]

Re: lenovo l14s g2 mec1503 pinout

j-link segger can operate with mec1503

Have you ever been successful?

[valtic]

Re: lenovo l14s g2 mec1503 pinout

j-link segger can operate with mec1503

j-link can't dump mec1503 from thinkpad

log:

- Target interface speed: 1000 kHz (Auto)
- VTarget = 3.301V
- TotalIRLen = 18, IRPrint = 0x000001
- JTAG chain detection found 1 devices:
- #0 Id: 0x02232445, IRLen: 18, Unknown device
- Connect failed. Resetting via Reset pin and trying again.
- TotalIRLen = 18, IRPrint = 0x000001
- JTAG chain detection found 1 devices:
- #0 Id: 0x02232445, IRLen: 18, Unknown device
- ERROR: CPU-TAP not found in JTAG chain

- ERROR: Failed to connect.
Could not establish a connection to target.
- ERROR: Connect failed

[jawal37]

j-link can't dump mec1503 from thinkpad

log:

- Target interface speed: 1000 kHz (Auto)
- VTarget = 3.301V
- TotalIRLen = 18, IRPrint = 0x000001
- JTAG chain detection found 1 devices:
- #0 Id: 0x02232445, IRLen: 18, Unknown device
- Connect failed. Resetting via Reset pin and trying again.
- TotalIRLen = 18, IRPrint = 0x000001
- JTAG chain detection found 1 devices:
- #0 Id: 0x02232445, IRLen: 18, Unknown device
- ERROR: CPU-TAP not found in JTAG chain

- ERROR: Failed to connect.
Could not establish a connection to target.
- ERROR: Connect failed

I WORK WITH J LINK TOO BUT I CANT HAVE ID FOR THIS CHIP MEC1503 MOTHERBORD NM-D341

[anhbanxoi]

I WORK WITH J LINK TOO BUT I CANT HAVE ID FOR THIS CHIP MEC1503 MOTHERBORD NM-D341

Remove the JTAG_STRAP resistor then you'll see the ID but unable to read with J-Link