please need the bios dump for Msi MS-16r41 ver 1.0 please
-
-
Re: need the bios dump for Msi MS-16r41 ver 1.0 please
I have uploaded my dump, my computer has no ac detect light and does not power at all although I have 5V and 3V ALWComment
-
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Mọi khoản quyên góp cho badcaps đều được hoan nghênh, hãy nhấp vào liên kết này để quyên góp. Cảm ơn tất cả những người ủng hộ----------------------------------------------------------------------------------------------------------------------------------------------------------------Comment
-
Re: need the bios dump for Msi MS-16r41 ver 1.0 please
thanksComment
-
Hello colleagues. I have a MSI MS-16R41 ver 1.0 that no longer boots after replacing the battery. I have checked the BQ24780S and it is fine. I have 5V and 3.3V always. When I press power on, I have 5VSUS, 3VSUS and 1.8VSUS. I have also reprogrammed Bios and EC. I don't know where to go from here as there are no schematics. Can you think of anything?
Bios and EC I don't know if they are ok. I attach the original ones. Thank you very much.
S/N K2009N0016154
Comment
-
i want bios msi MS-16R51 VER:1.2 PleaseComment
-
Off topic,different model. Start a new thread and post the laptop serial number,full laptop model number and your bios backups .Rules: https://www.badcaps.net/forum/troubl...before-posting
-
-
The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.
Suspected Cause:
I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.
Troubleshooting Attempts:
... -
Hi, I have an MSI PRO B660M-G DDR4 board with damaged BIOS and i need a bios dump from a real board, along with MAC, UUID and Serial Number info (eg. a BIOS screenshot and pictures from the board stickers).
I need to reconstruct the bios on my board, based on another bios image form a real board - meaning a bios image containing MAC address, UUID and Serial number. A stock BIOS is not suffiecient, as it is impossible to discover where the MAC, UUID and SerialNumber are stored. Tried with a similar board, but there are too much differences, and the stock BIOS is missing a lot of...11-17-2023, 10:56 AM -
This laptop is the same laptop I was working on in this thread and I wasn't sure if I should post a new topic or post in that thread because I already solved the issue that thread was discussing and this is a completely different issue although it is dealing with the same laptop. I decided to make a new thread since it's a new issue, but please move if I made a mistake.
Motherboard model number: DA0PAMB46A1 REV: A
Secondary motherboard model number: 0PAB
SKU: 685K4UA
Serial number is: 5CD3223BJP
Recently reflashed this laptop with latest BIOS and once... -
Hi,
I need a BIOS dump for MSI Z590 PRO WIFI from a real physical board, along with MAC address and serial no.
It must be a dump from a physical board, as it contains personalized data eg. MAC Address, UUID, Serial no.
I have a board which has lost the BIOS contents, I have the MAC and serial to this board, and need to insert it into the another BIOS image. To do it, I need to have a real image from a real board, as the images from the MSI site are without this data. The only way to find where MAC/UUID/Serial is located in the BIOS is to have a bios...11-06-2022, 05:22 PM -
Hi everyone,
I'm trying to recover a Fujitsu Lifebook E5513 (most likely 2023 model) that was bricked during a BIOS update. The update was interrupted (probably due to power loss), and now the laptop is stuck in a boot loop showing "PBB rollback" / "SBB rollback" messages.
BIOS access (F2) and Boot Menu (F12) are no longer possible – the system instantly reboots after the rollback messages.
I extracted the official BIOS update package from Fujitsu (contains FJNB2FD.CAP, ~18.7 MB) and tried tools like UEFIExtract, but it seems to only contain...
Comment