820-00840 a1708 bios needed =)

[itzusman]

try to remove it from the board, if it comes out in its entirety, read it, maybe you'll be lucky...

I tried but pin 5 of flash chip is broken. It is detached from the chip . it didn't detected in any programmer. I have tried in 3 diffrent programmers. Please help me.

[danito]

I tried but pin 5 of flash chip is broken. It is detached from the chip . it didn't detected in any programmer. I have tried in 3 diffrent programmers. Please help me.

Try
Not EMC 3164, is EMC 3154. maybe works

[itzusman]

Try
Not EMC 3164, is EMC 3154. maybe works

Ready have tried emc 3154. It didn't work.

[piszpunta]

Ready have tried emc 3154. It didn't work.

try

[itzusman]

try

Do i have to change serial number ? Can someone advise me where can i get fsys checksome of my MacBook pro?

[itzusman]

try

didn't work. Please any other solutions?

[itzusman]

Any one please help me with macbook Pro A1708 EMC3164 bios. Orignal chip ia broken by mistake. Didn't have any backup.

[itzusman]

Any one please help me with macbook Pro A1708 EMC3164 bios. Orignal chip ia broken by mistake. Didn't have any backup.

Any one?

[itzusman]

Re: 820-00840 a1708 bios needed =)



try..

Hi. Is it ME Clean bios for 1708 EMC3164?

[brontobyte]

Hello. Please help me clean bin for a1708 emc3164

[SMDFlea]

Do you need a reminder to post the serial number............ https://www.badcaps.net/forum/troubl...before-posting

[brontobyte]

C02VX0C1HV2D

[chipsetrepair]

MODEL : A1708

BOARD NUMBER : 820-00875-01

SERIAL NUMBER : C02SJHFLGVC1



Dear sir, Im having problem with this bios, the Lapto boot but it shutdown within seconds, suspecting the ROM got issue, please help me fix it.

[hoaca388]

MODEL : A1708

BOARD NUMBER : 820-00875-01

SERIAL NUMBER : C02SJHFLGVC1



Dear sir, Im having problem with this bios, the Lapto boot but it shutdown within seconds, suspecting the ROM got issue, please help me fix it.

Try

[chipsetrepair]

Re: A1708 ME Clean help needed =)



Hi My friends I have an A1708- 2017 that doesn't boot and is stuck on apple logo. I will post my bin file and request you guys who can help me do this. I actually have no experience and no style of doing cleaning and sn copy. would you guys help me by doing that for me. I really appreciate it.

Hey good afternoon, I have tried this file and the problem same.
The laptop can boot but it restarts at certain voltage
after flash the bios the coil - L7370 reach untill 1.048V but then restarts to 0 again reach 1.048V
possible flash the file again?