Mb part# Scala3-15/17CRV REV 1.2
BA41-01976A
Bios Needed.
PS: Will BA41-01978A dump will work on this mb??
BA41-01976A
Bios Needed.
PS: Will BA41-01978A dump will work on this mb??
-
-
SAMSUNG Scala3-15/17CRV REV 1.2 BIOS
hi i need bios for my samsung MB Part#: Scala3-15/17CRV REV 1.2
is anyone can help me plss...
-
Re: SAMSUNG Scala3-15/17CRV REV 1.2 BIOS
this one tested working goodComment
-
Re: SAMSUNG Scala3-15/17CRV REV 1.2 BIOS
hi need bios
scala3-15/17crv rev: 1.0
please helpComment
-
SAMSUNG SCALA3-15 17CRV rev 1.2 needed
Hi i need bios for SAMSUNG SCALA3-15 17CRV rev 1.2 please here is the original dumpComment
-
Re: SAMSUNG Scala3-15/17CRV REV 1.2 BIOS
Hi everybody . I need help . BIOS of notebook have password ",.mn" . It`s reasult from "biosbug.com" . But not open . I take dump bios with programmer CH341 . Maybe somebody will tell me , where this password take place in dump ? My motherboard scala3-15/17crv rev: 1.2 ; B41.....79A . Thx .Comment
-
Re: SAMSUNG Scala3-15/17CRV REV 1.2 BIOS
thanksComment
-
Re: SAMSUNG Scala3-15/17CRV REV 1.2 BIOS
Gracias bell77Comment
-
Comment
-
Re: SAMSUNG Scala3-15/17CRV REV 1.2 BIOS
SAMSUNG Scala3-15/17CRV REV 1.0
BA41-01978A HST
BİOS PLEASE...Comment
-
hi i need bios for my samsung MB Scala3-15CRV REV 1.1Comment
its working 100%.....thxx
-
After installing Linux, I can no longer enter the BIOS of my Samsung Series 9 (NP900X3C) laptop. When pressing [F2] during boot I simply get a black screen. Same thing when pressing [F10] and choosing "Setup" from the "App Menu" tab. Apparently this is a relatively common issue with Samsung laptops of that generation, but unfortunately i haven't been able to resolve the issue (yet).
Things i've tried so far; reinstalled Windows 10, checked for redundant boot entries, tried to factory reset using the emergency keyhole, attempted to clear the NVRAM by physically...08-01-2025, 09:15 AM -
Hello everyone,
I’m currently working on a dead MSI GP75 Leopard (MS-17E71) motherboard (i7 CPU, NVIDIA GPU) with a no display/no backlight issue initially. After extensive investigation, I’m at a critical stage involving EC firmware, BIOS/ME region interaction, and possible deep corruption. I'm seeking advanced insight from anyone with experience in EC/BIOS sync issues or PCH-level behavior. Here’s a full breakdown:
🧩 Initial Issue- Board powers on (fans spin, keyboard lights up and can be adjusted, caps lock led lights), but no display or backlight
- External display (HDMI) shows
07-24-2025, 02:17 PM -
The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.
Suspected Cause:
I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.
Troubleshooting Attempts:
... -
Hi all,
My Samsung Galaxy Book 2 Pro 15.6-inch laptop has no display and won't boot.
The charging red LED lights up, but the charging screen doesn't show any indication.
When I press the power button, the blue LED cycles on and off three times, then the screen doesn't turn on, and the device won't boot.
(I've tried removing the battery and resetting the device, but the issue persists.)
NoteBook Model name : Samsung NT955XED-KK51G(Galaxy book2 pro, i5-1240p, 15.6inch AMOLED)
PCB model name : Venus2-15-5G(REV1.2), Venus2-15 ADL NPC
S/N : 5RNK9FFT70... -
First of all thanks to all of our members who have posted previously all methods posted here.
Please leave a comment if you find something new,or have anything else to add.
-----------------------------------------------------------------------------------------
Find by serial number,model number or series
If you know the laptop serial or model number go to HP support https://support.hp.com/us-en/drivers/laptops .
Enter the serial number or model number and click submit.On the next screen you will have to enter the OS
Operating system and OS version.If...
Comment