Re: A1466 emc3178 efi lock
try..
MacBook Air 2017 A1466 EMC 3178 820-00165-A No power
Collapse
X
-
MacBook Air 2015 A1466 EMC 2925 efi lock
and this computer is also efi lockedAttached FilesLeave a comment:
-
A1466 emc3178 efi lock
Hello fiend, please help me need urgent file to unlock and flash the efi chipAttached FilesLeave a comment:
-
-
-
Re: A1466 emc 3178, 820-00165-a
be careful when writing because the bios you posted is longer...
try..Attached FilesLeave a comment:
-
Re: A1466 emc 3178, 820-00165-a
Please find attachedAttached FilesLeave a comment:
-
-
A1466 emc 3178, 820-00165-a
Need Bios for Macbook Air A1466 EMC3178, 820-00165-A .
Kindly helpLeave a comment:
-
-
Leave a comment:
-
macbook a1466 emc 3178 clear me
clear me this bios (820-00165-a)Attached FilesLeave a comment:
-
-
Re: Macbook air 820-00165a
Attached FilesLeave a comment:
-
Macbook air 820-00165a
Can somebody clean this dump please? not powering on, stuck in start loop 300mah draw pulse.
works with other dumps but no image so maybe someone can fix the original.
Thanks alot.Attached FilesLeave a comment:
-
-
Re: MacBook Air 2017 A1466 EMC 3178 820-00165-A No power
i want to remorve the efi code pleaseAttached FilesLeave a comment:
-
Re: MacBook Air 2017 A1466 EMC 3178 820-00165-A No power
Bad KB/touchpad/touchpad cableLeave a comment:
-
Re: MacBook Air 2017 A1466 EMC 3178 820-00165-A No power
First of all, I had flashed some file that I had found here on the page and after that it did not even turn on, only the orange led shone on the power plug and and when I tried to switch it on, the led went from orange briefly for 2- 3 seconds to green then back to orange but no fan turns and the cpu stays cool. is that actually coming from the wrong biosflash?
Ps.: vesko your data can i test later at this day i'm at work nowLeave a comment:
-
Re: MacBook Air 2017 A1466 EMC 3178 820-00165-A No power
Her is the link to download the Original backup
https://drive.google.com/file/d/10P4...w?usp=drivesdkAttached FilesLeave a comment:
Related Topics
Collapse
-
by Sergio KubCould someone help me?
I have a Macbook Air A1466 EMC 3178 - 2017, board 820-00165 and sometimes the boot interrupts with an image of a folder and a question mark.
Could it be the BIOS? -
by Sergio KubCould someone help me?
I have a Macbook Air A1466 EMC 3178 - 2017, board 820-00165 and sometimes the boot interrupts with an image of a folder and a question mark.
Could it be the BIOS? -
Hi everyone.
Macbook Air A1466 EMC 3178 (board 820-00165 A) not turning on and no charging light. Completely dead. With no battery connected it would power up and I could hear the chime, but nothing on the screen and then a sudden turn off. Sometimes during the chime. Opened it up and found some liquid damage. The flat that connects both boards has damage in one side (with a missing pin already). The connectors on the boards are fine, though.
Also, there was liquid damage on the included picture area, which are R8111 and C8111. A quick and soft brush on it made the resistor be gone....04-15-2024, 01:24 PM -
by sherifuHello guys, i have an Macbook Air A1466 Emc 3178, board number 820-00165-A and i encountered following problems. At first no light, no power..after opening and cleaning the LCD socket(Red dot under LCD plug and also Orange dot near wifi card)..got light on charger, fan working and chime...Tried several times and working, then short time after dead...next day work again for short time...after removing the board and cleaning the back(rust on components) with alcohol and soft brush, one of the resistor is gone and no power ..I want to change 5 (buy from China) of them (1 missing and 4 bot looking...1 Photo
-
by ACS-RepairI'm hoping someone can help me with a 2017 MacBook Air A1466 820-00165 that is running very slow. This is a board that I picked up on ebay recently.
This is not being caused by a sensor issue. All sensors report normal operation and the fans run at normal speed. Geekbench gives me a single core CPU value of 124, when it should be closer to 400. I was unable to complete an install on the SSD without putting it into a different computer first.
The board appears clean with no sign of liquid damage. I have done a PRAM and SMC reset, and I have done a reflow of the SMC. I have inspected... - Loading...
- No more items.
Leave a comment: