I need help please clean this file it shuts off 30minute and keep restarting
-
Last edited by String2016; 12-21-2020, 08:52 AM. -
Re: need to clean me region
still the same it shuts off 15min sometimes 20 to 30minutes then keep restarting and once shut down sometimes cannot turn need to rest for a minute to turn on again,this one has a dedicated graphicsComment
-
Re: need to clean me region
the one above is the bios i got here in this forum but here is the original backupComment
-
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
Re: need to clean me region
@peste thank you its workingComment
-
Laptop: Dell Precision 5540
MB: LA-H331P Rev: 1.0(A00)
Hi.
I am looking for a clean ME Region 12.0.95.2489 Corporate H CNP/CMP-H B, A
After extracting my BIOS in FIT the ME Region size is 7565 KB.
However the ME Region files I fouud online are 11688 KB in size.
Can someone help me find he correct clean ME Region?
Thanks!
...Code:╟─────────────────────────────┬───────────────╢ ║ Family │ CSE ME ║ ╟─────────────────────────────┼───────────────╢
-
Hello laptop repair experts,
can someone plese, help me understand the significance of cleaning ME region in a BIOS dump file?
I know that Manegement Engine (ME) data is part of BIOS/UEFI firmware. I know that it contains some HW specific data for the particular laptop.
What I don't know, why do I need to clean ME region if I try BIOS dump file from another laptop (of course same type and model). I'm not sure if this is only because of the serial number (not sure if that is stored in ME region at all).
Recently, I had a two cases where laptops (one is Lenovo Idepad...10-21-2023, 04:44 AM -
Hello
Can someone help clean the ME region?
I flashed the BIOS with this file and writes intel me unconfiguration in progress when loading
I wanted to try to clean the region myself, but I don't know which and where to get a file with a clean region for this motherboard. And what version do I need?
FITool 10.0.46.1002?
Chipset * North Bridge – Intel Q45 * South Bridge – Intel ICH10... -
The model is 15ec-1061nm
Board number is DAG3EDMB8D0
SO i turn the laptop on , and as soon as it starts booting from disk, from usb, windows,linux,HBCD,anything i boot it just turns off....while in bios menu or in linux boot menu it stays on normally...It's like when it starts to use graphics it shuts down...But i measured 0.72V while working on the GPU power line,no excess heat is comming from GPU or CPU, i even removed the heatsink and turned the laptop on and everything worked fine, got a bit hot, fan span to full speed, but it worked like that for few minutes in bios...10-29-2024, 12:05 AM -
It's possibly a Chinese offbrand laptop that uses a generic series of motherboards called y116te. It has no image.All power rails are working. No bios dumps could be found on the internet. Tried similar bios from this thread. No difference. I wanna try cleaning the TXE region of the bios but cleaning TXE region seems too advanced for my skills. Please help clean the TXE region from this dump
...
Comment