User Profile
Collapse
-
It seems like this model has a signature fault where it displays the logo then loops for a bit before shutting down completely. When it's in this state nothing gets hot on the motherboard aside from CPU slightly getting warm around the sides (not exactly in the corner) and every voltage rails are present except the VCORE. I've checked the enable signal on the 95857 PWM controller and it has EN present. In the end, I ended up ordering the motherboard from aliexpress which was dirt cheap. -
LG 15U70N GR5HK Bios needed
The motherboard number is da0nlembae0
i3-10th gen
Serial number: 003qcwc570297... -
-
Can you post both your old and new bios, so we can compare the changes
...
Leave a comment:
-
Optiplex 7410 AIO BIOS needed
Service tag: 2J7VWT3
Board number: Dakar-raptor lake 212039-1 RDKVM$HA
i5-12500T
PC is stuck on BIOS auto-recovery with no options... -
Sorry. It's an Dell Inspiron 15 3525 with Ryzen 5 5625U
Motherboard: HDL5D LA-L945P Rev 1.0 (A0)
Service Tag: 6DNK4W3
​...Leave a comment:
-
Need help repairing this BIOS. 1 amber 2 white flashing.
ST: 6DNK4W3...Leave a comment:
-
Inspiron 5330 BIOS needed
The laptop turns on but no image.
ST: 1KRPLS3
Motherboard number is Odin n13 mlk rpl 10l mb 213238-1... -
-
Hi! latitude 5540 Admin password removal needed.
ST: 8BSYLS3...Leave a comment:
-
-
-
Inspiron 3501 TPM Device not found error
Service tag: 1M9PNJ3...Leave a comment:
-
Oh the laptop has no serial number let alone a brand xD The laptop exterior is just plain grey with no markings....Leave a comment:
-
bios txe region y116te_e_glk
It's possibly a Chinese offbrand laptop that uses a generic series of motherboards called y116te. It has no image.All power rails are working. No bios dumps could be found on the internet. Tried similar bios from this thread. No difference. I wanna try cleaning the TXE region of the bios but cleaning TXE region seems too advanced for my skills. Please help clean the TXE region from this dump
...
-
FDX40 LA-J261P Power cycling after liquid damage.
Hello guys. I got this motherboard that had liquid damage. The motherboard's type-c controller IC got shorted which resulted in main power rail failing to be produced and after replacement of the IC the main power rail returned. But the board is turning on and off. The current consumption is around 0.120Amps@20volts. After like 10 seconds it turns off and on endlessly. Checking the voltages on the coils:
pl701-9.04 volts
plpl101-5.1 volts
pl201-1.2 volts
LT1-0(0.685kohms)
pl301-1.05 volts
pl100-3.3 volts
pl614-1.04 volts
pl402-0.9 volts
pl613-0... -
Macbook Pro 820-4924 Not powering on
Hello, I got a macbook pro motherboard 820-4924 that refuses to turn on. The motherboard draws 0.22 amps on bench PSU and PPBUS_G3H is 12.59 volts. P3v3s5 and P5v1_sw are both present and power button has 3.3v but it does nothing. The charger light blinks between green and orange. No visible damage on motherboard aside from lint and dust. The charger was swapped and there was no difference. What could be the issue here?...
No activity results to display
Show More
Leave a comment: