Hi all , need a working Bios Dump for Lenovo s340 15IIL
Motherboard FL5C5/FL535/FL435 LA-H103P REV 1.0
Thx a lot
Motherboard FL5C5/FL535/FL435 LA-H103P REV 1.0
Thx a lot
-
-
Re: Need Bios Dump for Lenovo s340 15IIL FL5C5/FL535/FL435 LA-H103P REV 1.0
post your backup -
Re: Need Bios Dump for Lenovo s340 15IIL FL5C5/FL535/FL435 LA-H103P REV 1.0
I attach the dump of the bios, but after saving it in any case in the verify it gives me an error.
Could it be that the chip is damaged?Comment
-
-
Re: Need Bios Dump for Lenovo s340 15IIL FL5C5/FL535/FL435 LA-H103P REV 1.0
Try NeoProgrammer software,its a good alternative.Make another backup.
https://www.badcaps.net/forum/showpo...04&postcount=7Comment
-
Re: Need Bios Dump for Lenovo s340 15IIL FL5C5/FL535/FL435 LA-H103P REV 1.0
Is this the machines serial number MP1PQW6PComment
-
Re: Need Bios Dump for Lenovo s340 15IIL FL5C5/FL535/FL435 LA-H103P REV 1.0
Try this bios.Comment
-
Re: Need Bios Dump for Lenovo s340 15IIL FL5C5/FL535/FL435 LA-H103P REV 1.0
can i get original bios for lenovo s340Comment
-
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
Fl5c5/fl535/fl435 la-h103p
can anyone unlock the password to this bios dump, let me know if i need to redo the dump with a different program, this is my first time attempting this. thank youComment
-
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
Re: Need Bios Dump for Lenovo s340 15IIL FL5C5/FL535/FL435 LA-H103P REV 1.0
HI,
attached a bios file from my s340 s340 15IIL laptop
Can you please help me get clean me bios ?Comment
-
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Mọi khoản quyên góp cho badcaps đều được hoan nghênh, hãy nhấp vào liên kết này để quyên góp. Cảm ơn tất cả những người ủng hộ----------------------------------------------------------------------------------------------------------------------------------------------------------------Comment
-
Hi
The laptop power on, fan starts and stop. Power on light remain. But the laptop does not start
Witout ram, no beep.
When off, I see 5v on one coil, but i dont see 3.3
When on, i see 5v, 3.3v, 1.2v, 1.8v
Can you help me inspect it? -
Hi,
need this Lenovo schematic please.
Customer replaced display on his own without disconnecting battery, JEDP1 burnt VCC Backlight contacts. Replaced cable and soldered pins directly to mainboard, Display (double-checked, working) now receives +12V again, still backlight stays off.
Thanks in advance!
BR, Ray -
plz i need to know this ic... -
This specification for the Lenovo ThinkPad S145-15IIL Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the S145-15IIL boardview and S145-15IIL schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download for...09-06-2024, 02:34 PM
-
Hello! I have this card in the workshop with startup issues. The equipment arrived dead. I replaced a coil and IC RTS5448, and now the equipment is turning on with low consumption at 0.04A at 20v. I don't have the complete startup sequence; I suspect there might be a short or damaged component that I can't find. I took measurements on IC PU402, and they seem correct. The coils PL404 have 5V, PL402 has 3.3V, PZZ1, and PLZ2 have 001.0 mV, PL301 has 1.3V, and PL502 has 020.0 mV, In PLG1, I have 073.0 mV, and in PQ313, I have 5-8 19v and 1-3 1.3v. Thank you. Any ideas are appreciated. By the way,...
Comment