Hi. my dump is working but first screen 30 second coming.
please my dump clean me.
model : casper c600
motherboard : da0lg9mb6e0 rev: E
please my dump clean me.
model : casper c600
motherboard : da0lg9mb6e0 rev: E
-
Last edited by SMDFlea; 12-09-2020, 10:03 AM. -
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs. -
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
Hi all,
This is my first post here (I am very new to forums!) and I hope someone can help. I am looking for a full dump of the BIOS of a HP Proliant Microserver Gen 8 so that I can get this mini server running again. (BIOS version J06 2019-04-04, chip 25Q064A). I think my board was partially bricked after a failed BIOS update.
I got it second hand in this state and all the normal attempts at bios restoration have not worked. I have even desoldered the chip and tried to load the actual BIOS from HP, but it is missing some parts needed to boot the system.
I... -
CASPER 926W - 900W MONİTÖR DUMP
MAG LP917W DUMP
200-100d985g-ah...12-20-2022, 12:38 AM -
casper excalibur intel i7-10750h gtx1660 danl5jmbcc0 rev c bios ver-cp171 Retrieved from the running system....05-17-2024, 03:53 AM -
motherboard code H310-SF110 V:1.0
old dump :... -
Dear all,
I have a ASUS ZenBook UX480F with the following symptoms:
I suspect it is a BIOS issue. So I decided to try to clean the ME region. I followed the guide on win-raid, and I believe I have done everything correctly. My problem is: when I open the outimage.bin in ME Analyzer, it says that it is Extracted, and not Region, Extracted as it should be. Is it normal, or did I do something not correctly? This is my first experience editing BIOS files.
I would appreciate if someone could take time to explain the issue, so that I can learn. But I would...
Comment