Samsung R580 BREMEN-M REV1.4
Samsung R580 BREMEN-M REV1.4(100816)-9 Bios please
here is my old one
here is my old one
-
Hi Guys,
I need a bios dump for the following laptop.
Samsung NP-R580
Motherboard : BREMEN-M REV:1.0 (091112)-5
Serial Number : BA68-05578A 20
Thank you​... -
The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.
Suspected Cause:
I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.
Troubleshooting Attempts:
... -
First of all thanks to all of our members who have posted previously all methods posted here.
Please leave a comment if you find something new,or have anything else to add.
-----------------------------------------------------------------------------------------
Find by serial number,model number or series
If you know the laptop serial or model number go to HP support https://support.hp.com/us-en/drivers/laptops .
Enter the serial number or model number and click submit.On the next screen you will have to enter the OS
Operating system and OS version.If... -
This specification for the Samsung Galaxy Book 2 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Galaxy Book 2 boardview and Galaxy Book 2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...09-07-2024, 05:50 AM
-
Hello everyone,
i made out of two broken Samsung Galaxy Tabpro S one that works partially.
The one Mainboard had a broken screen output but working hdmi (usb c adapter) output and the other didnt start at all.
I switch the bios chips and now the tablet starts but very very slow and it takes some trys to get it starting.
The problem is, that the micom Version doesn't match with the bios version, see picture.
How can i update the Micom Version? The Samsung bios update wont work.
With https://github.com/tavinus/SamsungBIOSTools i could extract the newest bios update...
Comment