Not sure if I have posted in the correct thread but I am looking for Flash Image Tool 9.5.12.1676, anyone has?
Looking for Flash Image Tool 9.5.12.1676
Collapse
X
-
Re: Looking for Flash Image Tool 9.5.12.1676
It doesn't have to be the exact tool version just make sure it starts with 9.5 .
The links to the flash image tools at post #1 .The win-raid link will have the latest version, not older ones.
https://www.badcaps.net/forum/showthread.php?t=88533
.Last edited by SMDFlea; 10-16-2020, 05:12 AM. -
Re: Looking for Flash Image Tool 9.5.12.1676
It doesn't have to be the exact tool version just make sure it starts with 9.5 .
The links to the flash image tools at post #1 .The win-raid link will have the latest version, not older ones.
https://www.badcaps.net/forum/showthread.php?t=88533
.Comment
Related Topics
Collapse
-
by wenl619Intel (R) Modular Flash Image Tool. Version: 18.0.10.2285...
-
by CapThatBrassHi,
Does anyone know of a trusted source from where the FIT tool can be downloaded from? That is the latest version and archived versions if possible.
Thanks -
by apppostolHi all. The program version 16.xxx is very necessary.
Can't find it anywhere. Is it really that rare? Maybe someone has. I will be very very grateful.02-28-2023, 12:12 PM -
by tsavpynDear all,
I forgot my BIOS password of my Surface Pro 3, I searched for solutions for a long time and knew that by using FPT to dump my bios to bin file and using decryptor, I can get my BIOS password.
Now I have a problem that I am unable to dump my BIOS into bin file.
My Surface Pro 3 currently runs on Ubuntu 22.04, with Secure Boot enabled and Boot From SSD Only.
I searched for FPT but there is no Linux version and none of them work.
I hereby request a copy of Intel Flash Programming Tool for Linux x64.
I would really appreciate it if anyone...-
Channel: BIOS Requests ONLY!
-
-
by ekozeko333Hi all,
I’m trying to recover a Lenovo Yoga Slim 7-14ARE05 with board DA0LS3MBAF0 Rev:F. I’ve run into an unusual issue where USB-C PD is stuck at 4.7–5V and the system won’t boot (keyboard lights flash briefly, then nothing).
🔥 The Problem Started After Suspected ESD/PD Fault
I experienced a power issue or ESD event through a USB-C charger
After that, the NX20P5090 power switch was visibly burned and was replaced
Now the PD controller always negotiates 5V @ 2A, even with known-good chargers
🧠 What I’ve Done So Far
Flashed...-
Channel: BIOS Requests ONLY!
-
- Loading...
- No more items.
Comment