I have a bad chip read also on my side using a CH341 programmer. Detected the chip and read successfully and I had altered $sys to FF using HXD. Saved as a new file however the flash failed. I repeated a second time and it failed once again during flash. Third time worked after flashing successfully however after resoldering the QFN to the logic board, the Mac no longer boots. I had used the compare data function on HXD to compare the 3 .BIN files and they are all different. Looking for some help is somebody could provide a healthly .BIN dump file.
Please Help Apple macbook pro A1708 EMC 3164 efi Lock
Collapse
X
-
-
hi all i need unlocked efi bios file for my macbook pro a1708 emc 3164 this the bios dump locked efi fileComment
-
RULES UPDATE for BIOS requests/offers AVOID BANNING, READ BEFORE POSTING
https://www.badcaps.net/forum/troubl...before-posting
You MUST:- Provide the full machine model number, serial number (or Service tag, SNID) and the board model number (see https://www.badcaps.net/forum/showthread.php?t=88758 ) ,The serial number, make, full model number, motherboard model and revision (except QR codes) must be written/typed at your request as per the rules. Not as a picture, part of the file name and so on.
-
-
Comment
-
Comment
-
-
try.. SNFVFWQ1CJHV2F.new.rarDue to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
Comment
-
HELOO GAYS can you help me with this bios i cant unlock this
Macbook pro a1708
SN FVFXXJXBHV22Attached FilesComment
-
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
ok my bad sory
HELOO GAYS can you help me with this bios i cant unlock this
Macbook pro a1708
SN FVFXXJXBHV22
EMC 3164Attached FilesComment
-
The bios chip must be unsoldered from the board before writing or reading..
do not use the clip, you may have errors..if you do not have anything to unsolder it with,
solder wires between the programmer and the bios chip..
read the chip and post again..Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
bios was desoldered and read. Programmer detected bios and read without errors. when trying to install it writes as if macbook was deactivated. I read it again and also without errors please here is biosAttached FilesComment
-
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
Related Topics
Collapse
-
Apple MacBook Pro laptop A1708 ECM3154 820-00840-A Boardview...
-
Channel: Schematics and Boardviews
-
-
Apple MacBook Pro 13" A1708 820-00875 051-02265 Schematic & Board View...
-
Channel: Schematics and Boardviews
-
-
Apple MacBook Pro A1708 820-00840-A Schematic & Board View...1 Photo
-
Channel: Schematics and Boardviews
-
-
by samstownHello,
This special tool from Apple is used to recover data from Macbook A1706. I've been using it for a while but it stops working. When connecting Thunderbolt 3 between the tool and working Macbook, Macbook should prompt "new device detected, allow or not"... but it doesn't.
Has anyone ever experience this ? It's not a cabling or power supply issue, some IC have stopped working but not sure which one. Probably the one that manager thunderbolt 3
Thanks
Claude... -
by arahbanHello Gentlemen,
I am working on an apple MacBook A2442 board pn 820-02098-A with a visible short on the PMIC U7700 MVK-PLUS as per the schematics
I have a donner board from apple macbook pro m1 A2338 PN 820-02020 and I saw that the PMIC U8100 TMLT46B0-JPE could be a possible replacement for the U7700
Can you please help me confirm if the U7700 can be replaced with U8100 ?
APL1098 is it the same as APL1096
Thank you very much in advanced
Ahmad - Loading...
- No more items.
Comment