day0ddmbae0 ec dump needed. Any help apreciated/
thx
thx
-
-
Re: day0ddmbae0 ec dump
What is the full laptop model/part number, and the board revision .Post your bios backup here .Last edited by SMDFlea; 03-10-2020, 07:29 AM. -
Re: day0ddmbae0 ec dump
i can post ec dump i have here, if it helps. its hp 13-4128tu. its the ec dump i have extracted from IT8987E/AXComment
-
Re: day0ddmbae0 ec dump
https://support.hp.com/us-en/drivers.../model/9092774 .Run the exe on a different pc,select copy to save the extracted bios to a folder.
The bios update has 4 different bios, it would be easier if you could post your bios backup to get the bid from (BID = bios ID)
0820D,0804E,0804F and 08035
3 of the bios are 8MB, the EC starts at 200000h, The 16MB bios starts at
A00000h .You can cut the EC out of each bios and try each one or post your bios backup !Last edited by SMDFlea; 03-10-2020, 08:33 AM.Comment
-
Re: day0ddmbae0 ec dump
alright mate, will do it. Actually i was trying to get a dump instead cutting from the official hp bios file. But, since there is no around will do that way.
thanks..Comment
-
Re: day0ddmbae0 ec dump
ok no problem.Comment
-
Re: day0ddmbae0 ec dump
for those who are looking for the same dump. Tested and working. no bid req. ec firmware is same for all.Comment
-
Hello all, as the title says, I'm very much in need of a valid firmware dump of a Anycubic Photon 5.5 3D resin printer. It's stored in a Winbond 25Q32, so it's 4Mbyte.
Here's a little background for my request. A few weeks ago I bought this 3D printer from a guy who had moved on to a PLA printer. I got it at a vey reasonable price, as it was in a defective state. The seller told me that he had experienced a power failure during a firmware upgrade, after which the printer appeared to be dead. He thought the firmware was corrupted in such a way that the printer was now bricked. As he... -
Hi everyone,
I accidentally bricked my NUC7i5BNH after disabling the option to boot from USB, and now it's not showing any display at all. I tried the USB recovery method, but unfortunately, it didn't work.
Local repair shops are quoting around $150 just to flash the EEPROM, but considering the unit is only worth about $75 these days, that’s not really an option. So I'm hoping to learn how to flash the chip myself. But to get started, I need a working BIOS dump for the NUC7i5BNH.
I did come across a post with a dump for the NUC7i7BNH, but I wasn't sure...06-19-2025, 06:37 PM -
Ho ho ho, badcaps people,
if this qualifies as bios request, hopefully. Actually BIOS2 for that laptop is second smaller SPI flash (Winbond W25Q80DVSNIG-GP-U), containing supposedly some config for TPS65988 which in turn manages USB-C stuff, including PD. This is possibly flash, where update "Power Delivery Firmware (TI TPS65988)" F407.06.29 -- https://download.lenovo.com/pccbbs/mobiles/r10pd10w.exe does its thing. Previous owner claims that after clean install of Windows 10 he installed thinkvantage tool of sort, which updated everything for that laptop. I did glance over... -
Lenovo ideapad 3 14IGL05 bios dump needed
model: 81wh
sn: pf36ta6h
board no: nm-c961 gs453/gs553
hey guys above is my laptop info
it only blinks the power button kindly help me with a working dump
old dump attached... -
Looking for an EC dump for MSI MS-17E71 mainboard (KB9028Q EC chip)
It is in MSI GL75 LEOPARD 10SFR laptop.
BIOS dump might also come in handy.
Thanks!
Comment