help cleaning this bios probook 430 g4 x81

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • bluestar77
    Senior Member
    • Apr 2015
    • 57
    • sudan

    #1

    help cleaning this bios probook 430 g4 x81

    Please any one help me cleaning this bios probook 430 g4 x81
  • bluestar77
    Senior Member
    • Apr 2015
    • 57
    • sudan

    #2
    Re: HP Probook 440 G4 Working BIOS

    Here its
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

    Comment

    • kalilinux25
      Badcaps Legend
      • Mar 2018
      • 2093
      • ZAMBOANGA SIBUGAY

      #3
      Originally posted by bluestar77
      Please any one help me cleaning this bios probook 430 g4 x81
      it will begreat if you can share your serial number

      Comment

      Related Topics

      Collapse

      • studdy05
        Bricked HP Probook 450 G7 Bios questions
        by studdy05
        Hp Probook 450 G7 s# SCD0348W35 had a locked BIOS. Bought BIOS and EC chips off Ebay that were supposed to match this machine - the 450 G7. Flashed in the BIOS on chip i bought using a CH341. BIOS unlocked next boot. Some error to contact HP. Entered BIOS and reset to system defaults and rebooted. Machine worked fine but every cold boot the contact HP message popped and everything else worked as fine. Assumed the error was from EC chip not matching BIOS that i just flashed in. So i flashed in the EC that was supposed to match from the EBay chip i bought and instant brick.

        Ive got...
        07-08-2025, 09:24 PM
      • macabook
        🛠️ MSI GP75 Leopard MS-17E71 – No Display, Deep BIOS/EC Troubleshooting
        by macabook
        Hello everyone,

        I’m currently working on a dead MSI GP75 Leopard (MS-17E71) motherboard (i7 CPU, NVIDIA GPU) with a no display/no backlight issue initially. After extensive investigation, I’m at a critical stage involving EC firmware, BIOS/ME region interaction, and possible deep corruption. I'm seeking advanced insight from anyone with experience in EC/BIOS sync issues or PCH-level behavior. Here’s a full breakdown:
        🧩 Initial Issue
        • Board powers on (fans spin, keyboard lights up and can be adjusted, caps lock led lights), but no display or backlight
        • External display (HDMI) shows
        ...
        07-24-2025, 02:17 PM
      • cr4zychriss
        [Problem/ Request] Bricked TongFang GK7MRFR BIOS
        by cr4zychriss
        Hello everyone,
        I am requesting urgent assistance to unbrick my laptop, a rebranded TongFang GK7MRFR chassis. The laptop is completely dead following a faulty in-OS EC flash attempt.
        I have successfully used a CH341A programmer and can read/write/verify both flash chips, but using my backups/extractions has failed to restore power. The root cause is likely a corrupted Intel Management Engine (ME) region or an incompatible EC/BIOS pairing. System & Hardware Details
        • Barebone / Chassis: TongFang GK7MRFR
        • MB: MB: GK5MP5X V1.0 Prod :GK5MRFV10T04201310281
        • Rebrand: PC Specialist
        ...
        11-14-2025, 04:04 PM
      • pirati
        ASUS Zenbook Pro Duo UX8402ZA BIOS
        by pirati
        Hello everyone,

        I recently bought a non-working Asus Zenbook Pro Duo OLED UX8402ZA that was listed for parts only. The seller mentioned that it had no display output but that the charging lights worked.

        When the laptop arrived (without a charger and SSD), I connected a charger and confirmed with a multimeter that it was charging the battery. However, when I tried to power it on, only the backlight of the secondary display came on. There was no image, and it didn’t boot into the BIOS.

        I decided to try flashing a new BIOS, but since I didn’t want to desolder...
        10-27-2025, 04:20 PM
      • mkdj
        ASUS ZenBook UX480F : need help with cleaning the ME region of my BIOS dump
        by mkdj
        Dear all,
        I have a ASUS ZenBook UX480F with the following symptoms:



        I suspect it is a BIOS issue. So I decided to try to clean the ME region. I followed the guide on win-raid, and I believe I have done everything correctly. My problem is: when I open the outimage.bin in ME Analyzer, it says that it is Extracted, and not Region, Extracted as it should be. Is it normal, or did I do something not correctly? This is my first experience editing BIOS files.

        I would appreciate if someone could take time to explain the issue, so that I can learn. But I would...
        10-19-2025, 04:41 AM
      • Loading...
      • No more items.
      Working...