See the attatched picture,your ITE_2.bin is on the left,the 128KB EC i cut from the VMK bios is on the right. Compare the 2 files.At offset E050 the ITE_2 says IT8171-bbk--v1.0 ,itmust be the 8KB bootblock from E000-FFFF.The first dump ITE_.bin is 56KB ,there`s no bootblock, all 3 files compared the same (56KB) from block 0-DFFF .Did you delete the FLASH=56 parameter before you dumped the ITE_2.bin
Yes, ITE_2.bin is with FLASH=64, I also tried removing the FLASH parameter (The default makes FLASH=128) But it has the same results.
Also looking at boardview, I managed to dump and program IT8995 with the full EC file.
But I also checked that Main bios reprograms it after first boot. (After first boot I compare both dumps and they're different)
Hi I'm looking for the EC BIOS to flash an IT8171FN-56
My Keyboard doesn't work. Replaced the chip but the EC file I downloaded didn't work either.
I managed to make keyboard working to a GL753VD following this post: https://rog.asus.com/forum/showthrea...nt-Tool/page12
2 issues, tho: Caps lock close display backlight and keyboard backlight is not working. Copy in fw tool folder created any FW_NKxxx and rename it as NK.bin, try with all versions, no need to use other tools to flash EC.
I managed to make keyboard working to a GL753VD following this post: https://rog.asus.com/forum/showthrea...nt-Tool/page12
2 issues, tho: Caps lock close display backlight and keyboard backlight is not working. Copy in fw tool folder created any FW_NKxxx and rename it as NK.bin, try with all versions, no need to use other tools to flash EC.
HELLO , ok for ME firmware , no ok for backlight keyboard .
Comment