...
Slavol
Member
Last Activity: Today, 04:39 AM
Joined: 05-12-2015
Location: Wroclaw
-
Working OK, NMVE ok, MAC adress OK - ThankYou...
-
Thank YOU .. hoaca388 many thanks - working !!...
Leave a comment:
-
Hello
I have a problem with the BIOS in my laptop. I upload a 32MB (UC2) file from this forum and the laptop always starts correctly the first time.
I enter the ServiceTag, start it and it's OK. But every time after exiting Manufacturing MODE (ALT-F) the laptop stops starting and responding to the power button.
The file from the UC6 system remains the same, because I couldn't find another working one.
After uploading the same file to UC2 again the situation repeats itself, it always stops working after ALT-F.
I suspect that I need to upload either both UC2...Leave a comment:
-
Many THANKS !!Leave a comment:
-
Thanks, but no change - still no boot
Leave a comment:
-
Thinkbook 13x itg
Hi, I have a Thinkbook 13x itg - I can't start it
I need a good BIOS with clean ME or maybe on my dump it will be enough to do Meregion cleaning? Mainboard sign: NB3093_MB_V4, SN: YX04E38X, MTM:20WJ0026PB
Please help me
Thanks... -
BoardView in CAD Enjoy ...
Leave a comment:
-
I find which resistors are responsible for disable onboard RAM. Attached picture. Regards...
Leave a comment:
-
NM-E051 ram onboard disable
Hi, I need to disable RAM onboard in NM-E051
Has anyone done this before or can help me turn it off? After enabling graphics in Device Manager, I get artefacts, squares and a restart. I suspect it's the built-in RAM.
Thanks -
thank you for your reply, I checked your suggestions and tested a few other batches but unfortunately it doesn't work.
This piece of code from the first picture is not a password.
In clean bios it is not possible to fill DMI data, mybe I have wrong programmm
I bought a damaged board and reinstalled the BIOS and KBC - it worked
Thanks...Leave a comment:
-
Passwor removed L590 - NM-B931 (20Q7)
Hello,
I would like to ask for help in removing the password from the EC dump my Lenovo L590.
I have dump from the laptop via Vertyanow, but when I upload a clean EC, there is no password, but laptop on POST generates errors of lack of RFId, SN, etc. of the entire DMI.
Could someone please remove the password from this file to keep the entire DMI? Is this possible? EC is IT8227-256
My dump EC with paassword:
Many thanks...
-
THANKS!!Leave a comment:
-
Thank You guys - nothing change. Propbably procesor damaged, on thermosvision i see heating SB...
Leave a comment:
-
I've read this EZP2019 chip 3 times and each time the file is identical, that's probably why this laptop doesn't work
Leave a comment:
-
SN: QCCBKV0TC04601915Leave a comment:
-
Asus Zenbook UX393E
Hello,
I need a working BIOS from the UX393EA motherboard, I am attaching a screenshot - the laptop starts up and the diodes are on, but there is no image, the current consumption is sometimes 0.04A.
Laptop SN: QCCBKV0TC04601915
Thanks for help...
-
Thanks, but no effect - same problem - maximum fans turned on and blank screen - starting at 1.7A nad after few seconds stable current consumption 1.2A, but no restart effects as with clean BIOS or removing the RTC battery...Leave a comment:
-
Hi, I can't deal with repairing the laptop as in the topic - it starts immediately with full fan speed, no image, voltages on the coils are correct. I was looking for the right bios, but I didn't find it, so I replaced it with another one from this forum and the effect was the same.
Could someone help me and post the bios from the LA-E992p rev 1.0 (A00) board with Inspiron 7759 ServiceTag: 5ZTQPH2
Thank you.
Oryginal dump - this bios is 16MB is only one (and EC 1MB)...Last edited by Slavol; 12-19-2023, 04:05 AM.Leave a comment:
-
Re: Asus Rog Strix GL502VM EC Bios Needed
Here is works firmware for this IT8171 - all keyboard works OK - tested on GL753VD...Leave a comment:
-
Re: Dell Precision T7910 no bios, no post after applying SAS/RAID setup
Your ul3 file is empty.
Here is my dump - try...Leave a comment:
No activity results to display
Leave a comment: