Panasonic Toughbook CF-532* mk4 Need reset

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Komplex
    New Member
    • Aug 2019
    • 3
    • United States
    #1

    Panasonic Toughbook CF-532* mk4 Need reset

    I dumped my BIOS chip mx25L12873F using a SOIC8 SOP8 chip clip and ch341a mini programmer in ch314a 1.34.

    Could someone help me reset my bios? I have been trying to decrypt the password in AMITSeSetup but it isnt working. Also tried just replacing the password part of the BIOS dump with a password hash I know and it gave me bad checksum and reverted
    Attached Files
    Tags: None
    • piernov
      Super Moderator
      • Jan 2016
      • 4437
      • France
      #2
      Re: Panasonic Toughbook CF-532* mk4 Need reset

      Try this maybe
      Attached Files
      OpenBoardView — https://github.com/OpenBoardView/OpenBoardView

        Comment

        • Komplex
          New Member
          • Aug 2019
          • 3
          • United States
          #3
          Re: Panasonic Toughbook CF-532* mk4 Need reset

          It worked, Thank you! Is there a way to remove computrace from that bios dump?

            Comment

            • piernov
              Super Moderator
              • Jan 2016
              • 4437
              • France
              #4
              Re: Panasonic Toughbook CF-532* mk4 Need reset

              Unfortunately I don't know how to remove Computrace. Maybe someone else has some information on this…
              OpenBoardView — https://github.com/OpenBoardView/OpenBoardView

                Comment

                Previous template Next

                Related Topics

                Collapse
                • AquaMan Ua
                  Panasonic toughbook CF-19 help connect the HDD directly. Need a SATA pinout.
                  by AquaMan Ua
                  Hello, dear community. NEED A DIAGRAM of the HDD/SSD connector contacts as an example (a screenshot from the diagram of another laptop on which I have already done this and a photo of the patient's board) Maybe someone can make a screenshot of the diagram with the pinout? Or does someone have a diagram of the motherboard schematic?

                  I am asking, because not find the information myself anywhere. I have a PANASONIC CF19 MK2 laptop (Any revision will do, I do not think that the contacts in the connector are located differently) but finding a basket for it at reasonable prices is a problem....
                  2 Photos
                  08-26-2025, 09:07 AM
                • eukal
                  Panasonic toughbook cf-h2 Mk1 no power, 3.3v-5v present but no 3v on bios chip
                  by eukal
                  Hello, i have a Panasonic Toughbook Cf-H2 Mk1 that won't power on. The battery charge without problem but no response from the laptop when i press the power button.
                  I have disassemble and unpluged the cmos battery, same no power on on battery with and whitout the adapter, and only adapter
                  I have check the voltage i have the main power rail ( +-16v normal for toughbook it's not 19v). I have on the coil after power management chip 3.3v and 5v.
                  I have check the 3.3v on the power button ribbon cable attach to the motherboard and the voltage go to 0v when i press the button. So...
                  07-01-2023, 01:00 PM
                • Nedim Merdan
                  Panasonic toughbook CF-D1DW200FZ motherboard DL3UP1969CAA schematic
                  by Nedim Merdan
                  Does anyone have the schematic for toughbook cf-d1 mk1 motherboard model is DL3UP1969CAA thanks in advance
                  12-07-2024, 02:22 PM
                • David Smedley
                  Panasonic FZ-55 Toughbook main board schematic request
                  by David Smedley
                  I've been working on this awful project with a Panasonic FZ-55, basically I'm trying to intercept the eDP signal from the main board, and replace it with my own eDP signal connected from an lcd driver. The problem is, for some reason the 30 pin ribbon pinout is really unusual and not playing nice with my LCD controller. Long story short, I managed to fuck up my board and pull off some pads on the eDP out port, I'm hoping to find either another eDP out source somewhere else on the laptop, or figure out this goddamn pin layout so I can just replace the whole native display complex with my controller...
                  09-04-2024, 02:57 PM
                • scopce
                  Panasonic Toughbook FZ-G2
                  by scopce
                  Hello friends, can somebody please help me get rid of Autopilot (MdM) on this dump?

                  i've been working on it with a friend for couple of days and we can't identify SN to have it replaced....
                  09-10-2025, 01:14 PM
                • Loading...
                • No more items.
                Working...