Working
-
Last edited by imranromi; 03-23-2016, 06:31 AM.
-
Hello,
i have many 5050sff. all of them, and how i experienced over many years for all about 250 DELLs goin through my hands, are fully flashable and can be serviced in any way when the service_mode jumper is set.
Never ever i experienced problems with that.
Now i have one 5050sff machine, where this jumper isnt working at all.
I do not get the normal messge that the jumper is set when booting and a short test with FPT just confirms this. Everything is locked -->> EVEN for reading !?
The history of the machine is that i used it in my office... -
Hello everyone,
I need the EC firmware dump for Dell Latitude 5420, motherboard GDF40 LA-K491P Rev 3.0 (A02).
The embedded controller is MEC5107-LJ (UE1).
The EC flash chip is W25Q80DV, 8Mbit (1MB).
I already have the 32MB BIOS dump (W25Q256JV), but my system is still not powering on — just amber blink. I suspect the EC firmware is missing or corrupted.
If anyone has this board and can share their EC dump from the 25Q80DV, I’d be very grateful.
Thank you in advance!... -
I have dell 5490 la-f401p problem: no display ( in HDMI out working )
changed working bios ,working screen ,cable
Please help me to resolve the issue
i have more then 7 laptop's having the issue -
Hi, I need Dell percision T5500 bios dump
I tried extracting the ones from dell's website
but they are not the same size as the one saved feom the bios chip.
or if their is a way to make the one from dell's website work when programed to bios chip.
Thank you in advance for your help. -
Hi everyone,
I've got a little "problem child": my Dell Latitude 7420 2-in-1, which had a faulty mainboard.
I replaced it, but ever since, the touchscreen no longer works — and honestly, I’m running out of ideas…
In Windows Device Manager, I just see an I2C HID Device with error code 10. Sporadically, the touchscreen is recognized correctly for just a few seconds, but I haven’t been able to determine under which circumstances this happens.
The touchscreen also doesn’t work in UEFI/BIOS, although it’s enabled...