Lenovo IdeaPad 330S-15ARR - 330S_ARR_V06

[volinakis]

I would like to ask again.
Using innoextract in Linux, I extracted this from the exe file

-rw-rw-r-- 1 gusto gusto 8946928 dec 18 2019 BIOS.cap
-rw-rw-r-- 1 gusto gusto 55 dec 18 2019 default.rsp
-rw-rw-r-- 1 gusto gusto 524800 dec 18 2019 DosFlash.exe
-rw-rw-r-- 1 gusto gusto 7191544 dec 18 2019 SctWinFlash64.exe
-rw-rw-r-- 1 gusto gusto 465912 dec 18 2019 WinFlash64.exe

If you notice the BIOS.cap has 8946928 bytes. However, the file BIOS.bin.zip that you uploaded to the forum has 8388608 bytes.

-rw-r--r-- 1 gusto gusto 8388608 okt 29 11:21 BIOS.bin

Am I making a mistake somewhere when I open BIOS.cap in the hex editor?
Do I still need to do something with BIOS.cap?

read what i wrote in previous post: you HAVE TO edit BIOS.CAP in order to get right length. you are welcome.

[fmarquis]

Hello,
I read all this thread again and again, bought a.programer and managed to read my corrupted chip. I extracted all required data and put them on one of the template Bios from this forum.
But now I can't seem to write the chip with the new bios. I think that I may have burnt it :/ The software can't detect it.

What can I do ?
Buy a new chip and try to replace it on the motherboard ?
Is there a way to confirm that the current chip is burnt ?
Thanks

[gusto]

you have to use innoextract to get bios image from update. Then edit with any hex editor to get right length - 8.388.608 bytes. Then transfer DMI.

try this one:

I would like to ask again.
Using innoextract in Linux, I extracted this from the exe file

-rw-rw-r-- 1 gusto gusto 8946928 dec 18  2019 BIOS.cap
-rw-rw-r-- 1 gusto gusto      55 dec 18  2019 default.rsp
-rw-rw-r-- 1 gusto gusto  524800 dec 18  2019 DosFlash.exe
-rw-rw-r-- 1 gusto gusto 7191544 dec 18  2019 SctWinFlash64.exe
-rw-rw-r-- 1 gusto gusto  465912 dec 18  2019 WinFlash64.exe

If you notice the BIOS.cap has 8946928 bytes. However, the file BIOS.bin.zip that you uploaded to the forum has 8388608 bytes.

-rw-r--r-- 1 gusto gusto 8388608 okt 29 11:21 BIOS.bin

Am I making a mistake somewhere when I open BIOS.cap in the hex editor?
Do I still need to do something with BIOS.cap?

[gusto]

I used innoextractor and extracted bios.cap, but there was no match out of 8,388,608 bytes.
So I uploaded the one you gave me to the bios. I started NTB and it works great.

[volinakis]

Thank you. I followed your instructions in post #29.
First, I downloaded the official bios for my NTB from lenovo's website.
I'm not sure if I extracted the bios bin correctly from the exe file.
I used the 7zip program to extract. From the extracted files, it seems that bin will be this file [0] (6575 Kb). However, when I open file [0] in HxD, I don't like it at all (I am attaching file [0]).
Can you please check if [0] is really correctly extracted from the exe file?

you have to use innoextract to get bios image from update. Then edit with any hex editor to get right length - 8.388.608 bytes. Then transfer DMI.

try this one:

[gusto]

Thank you. I followed your instructions in post #29.
First, I downloaded the official bios for my NTB from lenovo's website.
I'm not sure if I extracted the bios bin correctly from the exe file.
I used the 7zip program to extract. From the extracted files, it seems that bin will be this file [0] (6575 Kb). However, when I open file [0] in HxD, I don't like it at all (I am attaching file [0]).
Can you please check if [0] is really correctly extracted from the exe file?

[peste]

S/N: YD04LKXG
Model: 81FB
Factory ID: GXSC

Do you still need some data?

read post# 28

[gusto]

S/N: YD04LKXG
Model: 81FB
Factory ID:  GXSC

Do you still need some data?

[peste]

I used flashrom in Linux for the dump. I read the bios 3 times and got the same dump files (verified via md5sum). I read the whole forum, but I'm afraid to edit the file in the hex editor so I don't mess something up.
My NTB is a Lenovo IdeaPad 330S-15ARR - 330S_ARR_V06. Winbound 25q64fws10 is written on the bios.
Could someone help me with bios editing?

post the S/N, etc.

[gusto]

I used flashrom in Linux for the dump. I read the bios 3 times and got the same dump files (verified via md5sum). I read the whole forum, but I'm afraid to edit the file in the hex editor so I don't mess something up.
My NTB is a Lenovo IdeaPad 330S-15ARR - 330S_ARR_V06. Winbound 25q64fws10 is written on the bios.
Could someone help me with bios editing?

[gusto]

Hello, I would like to ask a question. After a lot of problems with the delivery company, I finally received the programmer (see # 145 post). However, when I looked at the chip, I found out that it is not CH341A, but CH341B (the eshop declared CH341A).
Will this programmer also work?

[hoaca388]

Hi
Need help, with this laptop:
- Lenovo ideapad 330S-15ARR
- model name: 81FB
- s/n: YD05RC99
(ship: W25Q64FWSSIQ)

-Issues: laptop turn on but no image (black screen)
Thank you

Your original file is full of 00 bits, reread the chip.

[SMDFlea]

Thread merged with existing topic.

[aminsab]

Hi
Need help, with this laptop:
- Lenovo ideapad 330S-15ARR
- model name: 81FB
- s/n: YD05RC99
(ship: W25Q64FWSSIQ)

-Issues: laptop turn on but no image (black screen)
Thank you

[albologna]

READ POST #82..

Perfect. Working. Thank you

[peste]

Please Help IdeaPad 330S-15ARR
It boots but No Image
SN : PF1HYUDK
Attached Original BIOS

READ POST #82..

[albologna]

Please Help IdeaPad 330S-15ARR
It boots but No Image
SN : PF1HYUDK
Attached Original BIOS

[gusto]

I ordered this programmer and I am waiting for delivery. I've read this thread and now I'm confused 🤔

[SMDFlea]

I want to buy a programmer in a local e-shop. In NTB I have this BIOS 25q64fwsig. This BIOS supposedly works at 1.8V. Do I also need a 1.8V adapter for the programmer?
The eshop shows that the programmer also supports WINBOND W25Q64.

There`s more info about the CH341A here https://www.badcaps.net/forum/troubl...21#post1622421 .

[peste]

I want to buy a programmer in a local e-shop. In NTB I have this BIOS 25q64fwsig. This BIOS supposedly works at 1.8V. Do I also need a 1.8V adapter for the programmer?
The eshop shows that the programmer also supports WINBOND W25Q64.

yes, if the chip works at 1.8v...