Ux310uv rev : 2.0 need bİos
Collapse
X
-
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests
all donations are welcome,
see the donate button at the bottom of the page, or
>>>>> click on this link to donate via PayPal. <<<<<
Every donation made will go towards server fees and maintenance costs.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------- -
Re: Ux310uv rev : 2.0 need bİos
Model: UX310U NotebookPC
CPU: I5-6200U
Password in BiosAttached Filesif you find these attachements useful please consider making a small donation to the site
----------------------------------------------------------------------------------------------------------------------------------------------------------
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests
all donations are welcome,
see the donate button below, at the bottom of the page, or
>>>>> click on this link to donate via PayPal. <<<<<
Every donation made will go towards server fees and maintenance costs.
----------------------------------------------------------------------------------------------------------------------------------------------------------
Doctrina est fructus dulcis, radicis amaraeComment
-
↵
Any donations to badcaps are welcome, click this link to donate . Thanks to all the supporters
https://www.badcaps.net/donateComment
-
Comment
-
Re: Ux310uv rev : 2.0 need bİos
Here is my original bios file. Help me clear MEAttached Filesif you find these attachements useful please consider making a small donation to the site
Comment
-
Comment
-
If you want to try a hardware method post your request in the laptop troubleshooting, To disable in the bios try the patcher -->
https://www.badcaps.net/forum/troubl...63#post3172363
-
-
ASUS UX310UAK (i5 6th) black screen after update.
I'm looking for a kind soul who will help me repair my laptop. Broken bios in the attachment. Thank you in advance!Attached Filesif you find these attachements useful please consider making a small donation to the site
DavidComment
-
-
-
hi try
Attached Filesif you find these attachements useful please consider making a small donation to the site
Comment
-
Bios + DMI.Attached Filesif you find these attachements useful please consider making a small donation to the site
Comment
Related Topics
Collapse
-
by knk2729dag3bembcd0 rev d Board view and Schematic needed for Non Graphic Conversion (DIS to UMA) as the Graphic chip is bad
-
Channel: Schematics and Boardviews
-
-
by shybearhi,
this laptop works but temperature rise too much. I dismounted mb and cleaned well. There was a lot of dust inside.
I think that there is a graphic chipset issue because when I power the machine I get this error:
"the detected discrete gpu VBIOS is not meant for this system"
This make me think that maybe the gpu VBIOS has to be re programmed.
BTW someone already worked on this mainboard. Near graphic board there is Winbond flash memory that I think its stored the VBIOS.
I attach some pictures and one of message error I get when I power on the ... -
by sahamipoorhello...
the Dell XPS L502x ( Model P11F ) [ DAGM6CMB8D0 rev.D ..3 of lines output LVDS from PCH has short ohm(0 -70) than LCD displat turn ON but is white !!!
i decide to change LVDS ports to Lcd from EXT_LCD graphic Studio Discrete to No need it LVDS lines of PCH use...
according to ُSchematic ,I changed any resistor and... Config_0 and Config_1 EC...but:
1- EXT_LCD_PWM no voltage to enable pwm
2-EXT_LVDS_VDDEN no High to Enable LCD_vcc
and screen is turn off and fan is high Speed!!
Question:
I need to Use Discrete graphic nvidia EXT_LCD ports... -
by quic307Hello techs,
I have the Acer E5-774G with nvidia 940MX. I have no image and I found faulty voltagies.
PL6013 -5.22v (normal 5.09v)
PL6012 - 3.43v (normal 3.3v)
PL11 - 1.21v (normal)
PL15 - 1.01v (normal)
PL9 - 0v
PL10 - 0v
PL14 - 0v
PL18 - 0v
PL5 - 1.04v (normal)
PL18 - 0v
PL2 - 0v
PL4 - 0v
PL1 - 12.68v (normal)
I changed KBC (ite8987e) and programming BIOS and KBC.
I'll attach the schem+boardview if someone need them.
Can you help me with my problem?
...10-31-2025, 01:35 AM -
GeForce RTX 2070 SUPER GAMING X (RTX2070) Graphic Card Schematic...
-
Channel: Schematics and Boardviews
10-31-2024, 02:55 AM -
- Loading...
- No more items.

Comment