Ba41-01938a bios please

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • kalilinux25
    Badcaps Legend
    • Mar 2018
    • 2093
    • ZAMBOANGA SIBUGAY

    #1

    Ba41-01938a bios please

    I need Samsung bios because i cant go to bios
  • narsil
    Enas
    • Dec 2017
    • 84
    • france

    #2
    Re: Ba41-01938a bios please

    Try this file as it works 100%
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

    Comment

    • kalilinux25
      Badcaps Legend
      • Mar 2018
      • 2093
      • ZAMBOANGA SIBUGAY

      #3
      Re: Ba41-01938a bios please

      it actually work thanks so much

      Comment

      Related Topics

      Collapse

      • Kjell
        Samsung Series 9 - BIOS issue
        by Kjell
        After installing Linux, I can no longer enter the BIOS of my Samsung Series 9 (NP900X3C) laptop. When pressing [F2] during boot I simply get a black screen. Same thing when pressing [F10] and choosing "Setup" from the "App Menu" tab. Apparently this is a relatively common issue with Samsung laptops of that generation, but unfortunately i haven't been able to resolve the issue (yet).

        Things i've tried so far; reinstalled Windows 10, checked for redundant boot entries, tried to factory reset using the emergency keyhole, attempted to clear the NVRAM by physically...
        08-01-2025, 09:15 AM
      • macabook
        🛠️ MSI GP75 Leopard MS-17E71 – No Display, Deep BIOS/EC Troubleshooting
        by macabook
        Hello everyone,

        I’m currently working on a dead MSI GP75 Leopard (MS-17E71) motherboard (i7 CPU, NVIDIA GPU) with a no display/no backlight issue initially. After extensive investigation, I’m at a critical stage involving EC firmware, BIOS/ME region interaction, and possible deep corruption. I'm seeking advanced insight from anyone with experience in EC/BIOS sync issues or PCH-level behavior. Here’s a full breakdown:
        🧩 Initial Issue
        • Board powers on (fans spin, keyboard lights up and can be adjusted, caps lock led lights), but no display or backlight
        • External display (HDMI) shows
        ...
        07-24-2025, 02:17 PM
      • Habble7
        I need a BIOS dump for the Samsung S49CG934SU monitor
        by Habble7
        The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.

        Suspected Cause:
        I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.

        Troubleshooting Attempts:
        ...
        05-22-2025, 07:28 AM
      • Citymin
        NT955XED (Samsung Galaxy Book2 Pro - 15.6) BIOS dump file Request
        by Citymin
        Hi all,

        My Samsung Galaxy Book 2 Pro 15.6-inch laptop has no display and won't boot.
        The charging red LED lights up, but the charging screen doesn't show any indication.
        When I press the power button, the blue LED cycles on and off three times, then the screen doesn't turn on, and the device won't boot.
        (I've tried removing the battery and resetting the device, but the issue persists.)

        NoteBook Model name : Samsung NT955XED-KK51G(Galaxy book2 pro, i5-1240p, 15.6inch AMOLED)
        PCB model name : Venus2-15-5G(REV1.2), Venus2-15 ADL NPC
        S/N : 5RNK9FFT70...
        08-05-2025, 05:12 AM
      • pirati
        ASUS Zenbook Pro Duo UX8402ZA BIOS
        by pirati
        Hello everyone,

        I recently bought a non-working Asus Zenbook Pro Duo OLED UX8402ZA that was listed for parts only. The seller mentioned that it had no display output but that the charging lights worked.

        When the laptop arrived (without a charger and SSD), I connected a charger and confirmed with a multimeter that it was charging the battery. However, when I tried to power it on, only the backlight of the secondary display came on. There was no image, and it didn’t boot into the BIOS.

        I decided to try flashing a new BIOS, but since I didn’t want to desolder...
        10-27-2025, 04:20 PM
      • Loading...
      • No more items.
      Working...