how to read bkp from 25Q64FVIG

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • recan21
    Member
    • Oct 2018
    • 23
    • Algeria

    #1

    how to read bkp from 25Q64FVIG

    any one have already tested to read backup from new 25Q64FVIG
    do i must solder directly pins to mother board ?
    i have EZP2013 programmer
    thanks for help.
    Attached Files
    Last edited by recan21; 12-30-2018, 05:23 PM.
  • mcplslg123
    Badcaps Legend
    • Jun 2015
    • 7262
    • india

    #2
    Re: how to read bkp from 25Q64FVIG

    You need something like this

    https://pt.aliexpress.com/item/Free-...802865327.html

    Comment

    • recan21
      Member
      • Oct 2018
      • 23
      • Algeria

      #3
      Re: how to read bkp from 25Q64FVIG

      i have solder all pins like this adapter and no chance to deyect eeprom
      maybe not supported by ezp2013 programmer!!!
      Last edited by recan21; 12-31-2018, 10:34 AM.

      Comment

      • recan21
        Member
        • Oct 2018
        • 23
        • Algeria

        #4
        Re: how to read bkp from 25Q64FVIG

        it's ok now !! i will read backup and post it here !
        Attached Files
        Last edited by recan21; 12-31-2018, 11:24 AM.

        Comment

        • recan21
          Member
          • Oct 2018
          • 23
          • Algeria

          #5
          Re: how to read bkp from 25Q64FVIG

          here is backup locked bios ! i need dump bios unlocked thanks:

          https://www.4shared.com/rar/7_tafx2o...rd-locked.html

          Comment

          • mcplslg123
            Badcaps Legend
            • Jun 2015
            • 7262
            • india

            #6
            Re: how to read bkp from 25Q64FVIG

            Originally posted by recan21
            here is backup locked bios ! i need dump bios unlocked thanks:

            https://www.4shared.com/rar/7_tafx2o...rd-locked.html
            Where is the model number details?? Write comlete details like HP X360 G2 etc.

            Comment

            • SMDFlea
              Super Moderator
              • Jan 2018
              • 20367
              • UK

              #7
              Re: how to read bkp from 25Q64FVIG

              Post your bios backup here, not on 4shared crap.
              All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

              Comment

              • recan21
                Member
                • Oct 2018
                • 23
                • Algeria

                #8
                Re: how to read bkp from 25Q64FVIG

                ok thanks for reply !
                i o a mistake about bios chip its not 25Q64FVIG. It's MX25L128(16MB)
                i make a new thread about this!
                Last edited by recan21; 01-01-2019, 08:38 AM.

                Comment

                Related Topics

                Collapse

                • langbaobao
                  DIY 3D-Printer WSON8 Pogo Pin Adapter
                  by langbaobao
                  Hi.

                  I'm posting this here in part as a memo to self as well as to describe the procedure I used in case anyone else found it useful. I found a lot of the necessary information to make this work on this forum and I figured I would give something back. If this is not the appropriate place to post this, I don't mind it being deleted but I hope it can help other people.

                  I got an admin password locked HP Elitebook 840 G5 recently that I wanted to unlock. I'm a relative newcomer to reprogramming and unlocking firmware. The only previous experience I had was unlocking a BIOS...
                  01-08-2024, 05:58 PM
                • STKR123
                  The right BIOS Programmer - The right software (HP Elitebook 820 G1, 840 G2) no soldering, EC, DMI, ME
                  by STKR123
                  Greetings badcaps community,

                  I havent done this for a long time and want to start it all again, after some evil and annyoing illness.
                  So I apologize in advance, if some phrases might sound a bit like gibberish or illogical to you.

                  Im trying my best to fully describe what I plan to achieve and hope I was choosing the right sub-forum for my new adventure.

                  I have a Elitebook 820 G1 and a Elitebook 840 G2 here.

                  These ask for a password when entering the BIOS, but boot just fine from the internal SSD.

                  I learned that desoldering...
                  10-29-2024, 06:03 AM
                • SMDFlea
                  Common SPI bios chip programming Questions and Answers
                  by SMDFlea
                  Common SPI bios chip programming Questions and Answers
                  ----------------------------------------------------------

                  Q: I have a bios request,i can`t post my backup as i can`t read from the chip.

                  A: If you can`t read from it how do you expect to write to it ?.

                  Q: Why is my bios chip unreadable ?.

                  A: The programmer is faulty or has a worn or broken zif socket.

                  The USB cable is frayed,connector pins worn or some other physical damage.

                  Not enough amperage or voltage to power the programmer properly.

                  Bad...
                  09-02-2021, 04:40 PM
                • araxnido
                  Programming KBC IT8987VG ASUS TUF FX506L RT809F+PEB
                  by araxnido
                  Dear friends, I want to share my experience repairing an ASUS TUF FX506L gaming laptop motherboard: DABKXDMB8E0_F_BKXD. Boardview and schematic are available, as well as the BIOS and ITE ROM.

                  When the customer brought in this laptop, it was initially dead; it showed no signs of booting for any reason. After hours of measurements, checking each stage, MOSFET, and seeing if there was a short circuit in any capacitor, I discovered a strange 0.7V leakage voltage on the 3V_S5 rail, particularly on the PL9 coil, with the board not powered on. There were 3V_LDO and 5V_LDO voltages, which...
                  06-10-2025, 09:26 PM
                • Teeheeze
                  RT809H Programmer Firmware Corrupted
                  by Teeheeze
                  This is a shot in the dark, but I was just using my RT809H programmer and it got stuck in a certain state so I power cycled it. Now, the device LED just flashes quickly and does not connect to the software. I've tried to update the BIOS of it and it fails. I went so far as to remove the ROM from the programmer itself but it's some weird chip (I believe ATMEL, but I can't find any datasheet on it) so I've been unable to read the BIN from it w/ my other programmer. Chip has ATMLHC4C56BM CN written on it (I think). I'll upload an image. I have the programmer's BIN ready to program it manually. Anyone...
                  02-13-2025, 04:51 PM
                • Loading...
                • No more items.
                Working...